modelSetPower
This model defines a specific mass flow rate based on the input power
share
Extends from Modelica.Fluid.Interfaces.PartialTwoPort.
Information
This model sets the mass flow rate of the air flow through a facade ventilation unit based on the input value, which is the power share set point of the fan.
- July, 2017 by Marc Baranski and Roozbeh Sangi:
First implementation.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | 0.05 | Nominal mass flow rate of fan |
| Medium.AbsolutePressure | p_start | Medium.p_default | Start value of pressure |
| Integer | noUnits | 1 | Number of identical FVU units |
| Modelica.Units.SI.PressureDifference | dp_nominal | 500 | Initial pressure difference |
| Medium.Temperature | T_start | Medium.T_default | Start value of temperature |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Tables.CombiTable1Dv | volumeFlow | Correlates the relative input signal and a volume flow rate | |
| Modelica.Blocks.Interfaces.RealInput | powerShare | Power share 0..1 for fan | |
| AixLib.Fluid.Movers.FlowControlled_m_flow | fan | Mass-flow-controlled mover setting mass flow rate from table | |
| Modelica.Blocks.Math.Gain | transforMassFlow | Used to transform the volume flow rate in m3/h into a mass flow rate in kg/s |