modelOpenLoopVarTSupplyDpBypass
A small open loop example with a Substation with variable dT for fixed return temperature
Extends from Modelica.Icons.Example.
Information
This is an OpenLoop example of AixLib.Fluid.DistrictHeatingCooling.Demands.OpenLoop.VarTSupplyDpBypass which is a simple substation model using a fixed return temperature and the actual supply temperature to calculate the mass flow rate drawn from the network. This model uses an open loop design to prescribe the required flow rate.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Temperature | T_amb | 283.15 | Ambient temperature around pipes |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Supplies.OpenLoop.SourceIdeal | sourceIdeal | Simple suppy model | |
| AixLib.Fluid.DistrictHeatingCooling.Demands.OpenLoop.VarTSupplyDpBypass | demand | Simple demand model | |
| FixedResistances.PlugFlowPipe | pipeSupply | Supply pipe | |
| FixedResistances.PlugFlowPipe | pipeReturn | Return pipe | |
| Modelica.Blocks.Sources.Constant | TSet | Set supply temperature | |
| Modelica.Blocks.Sources.Constant | dpSet | Set pressure difference for substation | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature | TGround | Ground temperature | |
| Modelica.Blocks.Sources.Constant | TGroundSet | Set ground temperature | |
| Modelica.Blocks.Sources.Sine | sine | A sine wave for varying heat demands | |
| Modelica.Blocks.Continuous.LimPID | pControl | Pressure controller |
Contents
| Name | Description |
|---|---|
| Medium |
Revisions
- March 17, 2018, by Marcus Fuchs:
First implementation.