modelRotaryCompressorPressureHeatLosses

Example model to test simple rotary compressors with pressure and heat losses

Extends from Modelica.Icons.Example, Modelica.Icons.UnderConstruction.

Information

This is a example model to test the simple rotary compressor presented in AixLib.Fluid.Movers.Compressors.SimpleCompressors.RotaryCompressors.RotaryCompressorPressureHeatLosses. Therefore, both the compressor's inlet and outlet conditions are prescribed in terms of pressure and temperature and the User can select different efficiency models using the dialog menu.

Type	Name	Default	Description
Modelica.Units.SI.AbsolutePressure	pInl	Medium.pressure(Medium.setBubbleState(Medium.setSat_T(TInl + 1)))	Current pressure at inlet conditions
Modelica.Units.SI.Temperature	TInl	283.15	Current temperature at inlet conditions
Modelica.Units.SI.AbsolutePressure	pOut	Medium.pressure(Medium.setDewState(Medium.setSat_T(TOut - 5)))	Current set point of the compressor's outlet pressure
Modelica.Units.SI.Temperature	TOut	333.15	Current temperature at outlet conditions

Type	Name	Description
Sources.Boundary_pT	source	Source with constant pressure and temperature
Modelica.Blocks.Sources.Sine	rotSpe	Prescribed compressor's rotational speed
Modelica.Thermal.HeatTransfer.Sources.FixedTemperature	fixTem	Fixed ambient temperature
SimpleCompressors.RotaryCompressors.RotaryCompressorPressureHeatLosses	rotCom	Model of a rotary compressor
Modelica.Blocks.Sources.Sine	valOpe	Prescribed valve's opening
Obsolete.Year2021.Fluid.Actuators.Valves.SimpleValve	simVal	Model of a simple valve to simulate pressure losses
MixingVolumes.MixingVolume	sink	Sink with constant pressure and temperature

Name	Description
Medium	Medium of the compressor