modelStaticCondenser
Static condenser assuming constant pinch point at condenser's outlet
Parameters
| Type | Name | Default | Description |
|---|
| General › Condenser |
| Modelica.Units.SI.TemperatureDifference | dTPin | 2.5 | Supercooling of working fluid |
| Modelica.Units.SI.TemperatureDifference | dTSubCool | 8 | Supercooling of working fluid |
| Modelica.Units.SI.Density | dSec | 1000 | Constant density of secondary fluid |
| Modelica.Units.SI.SpecificHeatCapacity | cpSec | 4.1813e3 | Constant specific heat capacity of secondary fluid |
| Modelica.Units.SI.VolumeFlowRate | V_flowSec | (0.776 + 0.781 + 0.44)/3/3600 | Constant volume flow of secondary fluid |
| Assumptions › General |
| Boolean | allowFlowReversal | false | = false to simplify equations, assuming, but not enforcing, no flow reversal |
Components
| Type | Name | Default | Description |
|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_a | | Fluid connector b (positive design flow direction is from port_a to port_b) |
| Modelica.Blocks.Interfaces.RealInput | inpTRetFlo | | Temperature return flow at heat capacity |
| Modelica.Blocks.Interfaces.RealOutput | outQFlo | | Heat capacity |
| Modelica.Units.SI.AbsolutePressure | pSat | | Absolute pressure at condenser's outlet |
| Modelica.Units.SI.Temperature | TSat | | Saturation temperature |
| Modelica.Units.SI.Temperature | TInl | | Temperature at condenser's inlet |
| Modelica.Units.SI.Temperature | TOut | | Temperature at condenser's outlet |
| Modelica.Units.SI.SpecificEnthalpy | hInl | | Specific enthalpy at condenser's inlet |
| Modelica.Units.SI.SpecificEnthalpy | hOut | | Specific enthalpy at condenser's outlet |
| Modelica.Units.SI.MassFlowRate | m_flow | | Mass flow rate |
| Modelica.Units.SI.HeatFlowRate | Q_flow | | Heat capacity |
| Modelica.Units.SI.MassFlowRate | m_flowSec | | Mass flow rate of secondary fluid |
| Modelica.Units.SI.Temperature | TFlo | | Temperature flow at heat capacity |
| Modelica.Units.SI.Temperature | TRetFlo | | Temperature return flow at heat capacity |