modelStaticEvaporator
Static evaporator assuming constant pinch point at evaporator's outlet
Parameters
| Type | Name | Default | Description |
|---|
| General › Evaporator |
| Modelica.Units.SI.TemperatureDifference | dTPin | 5 | Pinch temperature at evaporator's outlet |
| Modelica.Units.SI.TemperatureDifference | dTSupHea | 1 | Superheating of working fluid |
| Assumptions › General |
| Boolean | allowFlowReversal | false | = false to simplify equations, assuming, but not enforcing, no flow reversal |
Components
| Type | Name | Default | Description |
|---|
| Modelica.Fluid.Interfaces.FluidPort_b | port_b | | Fluid connector b (positive design flow direction is from port_a to port_b) |
| Modelica.Blocks.Interfaces.RealInput | inpTAmb | | Input of ambient temperature |
| Modelica.Blocks.Sources.RealExpression | outPEva | | Expressions describing saturation pressure at evaporator's outlet |
| Modelica.Blocks.Sources.RealExpression | outTEva | | Expressions describing temperature at evaporator's outlet |
| Sources.Boundary_pT | source | | Source with constant pressure and temperature |
| Medium.SaturationProperties | satEva | | Saturation properties of the evaporator's working fluid |
| Medium.ThermodynamicState | staOut | | Thermodynamic state of the working fluid at evaporator's outlet |
| Modelica.Units.SI.AbsolutePressure | pSat | | Absolute pressure at evaporator's outlet |
| Modelica.Units.SI.Temperature | TSat | | Saturation temperature |
| Modelica.Units.SI.Temperature | TOut | | Temperature at evaporator's outlet |
| Modelica.Units.SI.Temperature | TAmb | | Temperature of ambient |