modelAntiFreeze
Model to prevent source from freezing
Extends from BaseClasses.PartialSafetyControl.
Information
This models takes the minimum of the two temperatures evaporator outlet and condenser inlet. If this minimal temperature falls below the given lower boundary, the hystereses will trigger an error and cause the device to switch off.
Assumptions
Assuming that the outlet temperature of an evaporator is always lower than the inlet temperature(for the condenser vice versa).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | use_antFre | true | True if anti freeze control is part of safety control |
| Modelica.Units.SI.ThermodynamicTemperature | TAntFre | 276.15 | Limit temperature for anti freeze control |
| Real | dTHys | 2 | Hysteresis interval width |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.BooleanConstant | booConAntFre | ||
| Modelica.Blocks.Logical.Hysteresis | hysteresis | ||
| Modelica.Blocks.Math.Min | min |
Revisions
-
November 26, 2018 by Fabian Wüllhorst:
First implementation (see issue #577)