modelChiller
Extends from Modelica.Icons.Example.
Information
Overview
Example Setup is based on fluid example of AixLib.Obsolete.Year2024.Fluid.Chillers.Examples.Chiller
Components
| Type | Name | Default | Description |
|---|---|---|---|
| FastHVAC.Components.Sensors.TemperatureSensor | temperatureSensor | ||
| FastHVAC.Components.Pumps.FluidSource | fluidSource | Fluidsource for sink | |
| Components.Chiller.Chiller | chiller | ||
| FastHVAC.Components.Sinks.Vessel | vessel_ev | vessel for open evaporator circuit | |
| Modelica.Blocks.Sources.Constant | dotm_sink | Sink mass flow signal | |
| Modelica.Blocks.Sources.Constant | dotm_source | source mass flow signal | |
| Modelica.Blocks.Sources.Constant | iceFac | Fixed value for icing factor. 1 means no icing/frosting (full heat transfer in heat exchanger) | |
| Modelica.Blocks.Sources.Constant | T_amb_internal | Constant internal ambient temeprature | |
| Modelica.Blocks.Sources.Ramp | TsuSinkRamp | Ramp signal for the temperature input of the sink side's ideal mass flow source | |
| BaseClasses.WorkingFluid | Room | Volume | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow | heatFlowRateCon | Heat flow rate of the condenser | |
| Modelica.Blocks.Math.Gain | gain | negate sine signal | |
| Modelica.Blocks.Sources.Sine | sine | hourly sine | |
| Components.Pumps.Pump | pump | source pump | |
| Modelica.Blocks.Math.BooleanToReal | booleanToReal | ||
| Modelica.Blocks.Logical.Hysteresis | hysCooling | ||
| Modelica.Blocks.Sources.BooleanStep | booleanStep | ||
| Modelica.Blocks.Logical.Not | not2 | Negate output of hysteresis | |
| Modelica.Blocks.Logical.Hysteresis | hysHeating | ||
| Modelica.Blocks.Logical.LogicalSwitch | logicalSwitch | ||
| Year2024.Controls.Interfaces.VapourCompressionMachineControlBus | sigBus1 |
Revisions
-
May 22, 2019 by Julian Matthes:
Rebuild due to the introducion of the thermal machine partial model (see issue #715) -
January 22, 2019 Niklas Hülsenbeck:
Moved into AixLib