modelMultizoneEquipped
Illustrates the use of MultizoneEquipped
Extends from Modelica.Icons.Example.
Information
This example illustrates the use of AixLib.ThermalZones.ReducedOrder.Multizone.MultizoneEquipped. Parameter set is for an office building build as passive house. All boundary conditions are generic to show how to apply different kinds of boundary conditions. The results should show typical profiles for indoor air temperatures, but are not related to a specific building or measurement data.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| AixLib.ThermalZones.ReducedOrder.Multizone.MultizoneEquipped | multizone | Multizone | |
| AixLib.BoundaryConditions.WeatherData.ReaderTMY3 | weaDat | Weather data reader | |
| Modelica.Blocks.Sources.CombiTimeTable | tableInternalGains | Profiles for internal gains | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow[5] | prescribedHeatFlow | Radiative heat flow of additional internal gains | |
| Modelica.Blocks.Sources.Sine | sine | Sinusoidal excitation for additional internal gains | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow[5] | prescribedHeatFlow1 | Convective heat flow of additional internal gains | |
| Modelica.Blocks.Math.Gain | gain | Split additional internal gains into radiative an convective | |
| Modelica.Blocks.Math.Gain | gain1 | Split additional internal gains into radiative an convective | |
| Modelica.Blocks.Routing.Replicator | replicator | Replicates sinusoidal excitation for numZones | |
| Modelica.Blocks.Routing.Replicator | replicator1 | Replicates sinusoidal excitation for numZones | |
| Modelica.Blocks.Sources.CombiTimeTable | tableAHU | Boundary conditions for air handling unit | |
| Modelica.Blocks.Sources.CombiTimeTable | tableTSet | Set points for heater | |
| Modelica.Blocks.Sources.Constant[5] | const | Set point for cooler |
Revisions
- September 29, 2016, by Moritz Lauster:
Implemented.