modelMultizonePartlyCooled
Illustrates the use of Multizone
Extends from Modelica.Icons.Example.
Information
This example is based on AixLib.ThermalZones.ReducedOrder.Examples.Multizone. This example shows the variant of a multi-zone building with some zones where cooling is activated and others where it is not.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| AixLib.ThermalZones.ReducedOrder.Multizone.Multizone | multizone | Multizone | |
| AixLib.BoundaryConditions.WeatherData.ReaderTMY3 | weaDat | Weather data reader | |
| AixLib.BoundaryConditions.WeatherData.Bus | weaBus | Weather data bus | |
| Modelica.Blocks.Routing.Replicator | replicatorTemperatureVentilation | Replicates dry bulb air temperature for numZones | |
| Modelica.Blocks.Sources.Constant[5] | const | Infiltration rate | |
| Modelica.Blocks.Sources.CombiTimeTable | tableInternalGains | Profiles for internal gains | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow[5] | prescribedHeatFlow | Radiative heat flow of additional internal gains | |
| Modelica.Blocks.Sources.Sine | sine | Sinusoidal excitation for additional internal gains | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow[5] | prescribedHeatFlow1 | Convective heat flow of additional internal gains | |
| Modelica.Blocks.Math.Gain | gain | Split additional internal gains into radiative an convective | |
| Modelica.Blocks.Math.Gain | gain1 | Split additional internal gains into radiative an convective | |
| Modelica.Blocks.Routing.Replicator | replicator | Replicates sinusoidal excitation for numZones | |
| Modelica.Blocks.Routing.Replicator | replicator1 | Replicates sinusoidal excitation for numZones | |
| Modelica.Blocks.Sources.Constant[5] | TSet | Dummy for heater cooler (not existing in record) |
Revisions
- August 21, 2020, by Marcus Fuchs:
Implemented.