modelThermalZoneMoistAirSwimmingPool
Illustrates the use of ThermalZoneMoistAirSwimmingPool
Extends from Modelica.Icons.Example.
Information
This example illustrates the use of AixLib.ThermalZones.ReducedOrder.ThermalZone.ThermalZone. Parameter set for thermal zone is for a swimming hall of a swimming facility including two swimming pools. All boundary conditions are generic to show how to apply different kinds of boundary conditions. The results should show a typical profile for indoor air temperatures, but are not related to a specific building or measurement data.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| AixLib.ThermalZones.ReducedOrder.ThermalZone.ThermalZone | thermalZone | Thermal zone | |
| AixLib.BoundaryConditions.WeatherData.ReaderTMY3 | weaDat | Weather data reader | |
| Modelica.Blocks.Sources.CombiTimeTable | internalGains | Table with profiles for internal gains | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow | prescribedHeatFlow | Radiative heat flow of additional internal gains | |
| Modelica.Blocks.Sources.Sine | sine | Sinusoidal excitation for additional internal gains | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow | prescribedHeatFlow1 | Convective heat flow of additional internal gains | |
| Modelica.Blocks.Math.Gain | gain | Split additional internal gains into radiative an convective | |
| Modelica.Blocks.Math.Gain | gain1 | Split additional internal gains into radiative an convective | |
| AixLib.Fluid.Sources.MassFlowSource_T | sourcAir | mass flow rate of air into thermal zone | |
| AixLib.Fluid.Sources.Boundary_pT | sinAir | sink of air | |
| Modelica.Blocks.Sources.CombiTimeTable | tableOpeningHours | Boundary condition: Opening Hours of swiming pools | |
| Modelica.Blocks.Sources.Constant | const | Sinusoidal excitation for additional internal gains |