modelOutsideEnvironment
Outside Environment air volume for simple air flow benchmark
Information
An air volume to represent the outside environment for air flow benchmark.
Assumptions and limitations
So far, the side ratio for the building is set to 1 for testing the general modeling approach. It may be necessary to calculate this parameter depending on the scale of the test.
Typical use and important parameters
port_a and port_b should be connected to the corresponding ports of
ZoneHallway so that there is an air exchange through the orifices of the hallway
element.
References
Inspired by IBPSA.Airflow.Multizone.Validation.ThreeRoomsContam
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Height | heightRoom | 3 | Height of room connected to outdoor air in m |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_a | Fluid port at the top of the room | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b | Fluid port at the bottom of the room | |
| BoundaryConditions.WeatherData.Bus | weaBus1 | Bus with weather data |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Airflow.Multizone.MediumColumn | colOutBot | Lower air column | |
| Airflow.Multizone.MediumColumn | colOutTop | Upper air column | |
| Fluid.Sources.Outside_CpLowRise | out | Outdoor air volume |
Contents
| Name | Description |
|---|---|
 Medium | Medium in the component |
Revisions
-
February 2015 by Marcus Fuchs:
First implementation