modelJouleHeatingPIControlled
Electric convector with PI control
Information
Hypothesis and equations
- PI control with Gain = 1 and Integration time = 900 s.
- Unit heating considered via a 1st order filter of 60s.
Bibliography
none
Instructions for use
- Setpoint temperature and measured temperature must be with the same unit: °C or K
- The power to be injected into the building is Pelec.
Known limits / Use precautions
none
Validations
Model validated in its default operating conditions - Bernard Clémençon 06/2012
--------------------------------------------------------------
Licensed by EDF under a 3-clause BSD-license
Copyright © EDF 2009 - 2023
BuildSysPro version 3.6.0
Author : Bernard CLEMENCON, EDF (2012)
--------------------------------------------------------------
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Power | Pnom | 1500 | Nominal power of the convector |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | T_sp | Setpoint temperature | |
| Modelica.Blocks.Interfaces.RealInput | T_int | Indoor temperature measure | |
| Modelica.Blocks.Interfaces.RealOutput | Pelec |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Math.Gain | gain |
Revisions
Gilles Plessis 03/2014 : Modification des filtres du premier ordre issus initialement de LinearSystems2 vers Modelica.Block.Continuous. Evite l'appel à des bibliothèques externes lorsque ca n'est pas nécessaire.