blockLogStoveController
Information
PB50 LOG STOVE's REGULATOR
Regulation system(representative for exemple of successive manual loads of logs) of a stove
Hypothesis and equations
The model connects to the stove without regulatuion
This model's purpose is to be part of the PB50 model
Tthe control is done according to the informations given by the user
The user can decide to use a "forced going" mode when he's in the house
The two outputs are the time of the start phase and the combustion rate
Bibliography
detailled model is the note :H-E14-2011-01955-FR
Instructions for use
none
Known limits / Use precautions
none
Validations
Validated model - EIFER 09/2011
--------------------------------------------------------------
Licensed by EDF under a 3-clause BSD-license
Copyright © EDF 2009 - 2023
BuildSysPro version 3.6.0
Author : EDF (2011)
--------------------------------------------------------------
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | dT_seuil_N | 1 | temperature gap to use the stove at a normal rate |
| Real | dT_seuil_R | 0.7 | temperature gap to use the stove at lower rate |
| Real | dt_charg | 0 | in forced going mode: set the time gap between the end of combustion and the start of a new one |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | m_b | Actual mass of wood in the stove | |
| Modelica.Blocks.Interfaces.RealInput | Tconsigne | Temperature wanted | |
| Modelica.Blocks.Interfaces.RealOutput | tim_start | Starting combustion time | |
| Modelica.Blocks.Interfaces.RealOutput | allure | Combustion rate | |
| Modelica.Blocks.Interfaces.BooleanInput | presence | Indicates if the user is present in the house | |
| Modelica.Blocks.Interfaces.BooleanInput | marche_forcee | Indicates if "forced going" mode is activated | |
| Modelica.Blocks.Interfaces.RealInput | Tsens | Temperature of the room |