modelPGVH_controller
Information
PGVH PELLET'S STOVE REGULATOR
Hypothesis and equations
The purpose of this model is to be part of the PGVH model
The control is done according to the difference between the actual romm temperature and the temperature wanted.
The only output is the fraction of maximum power delivered
Bibliography
none
Instructions for use
none
Known limits / Use precautions
none
Validations
Validated model - EIFER 08/2011
--------------------------------------------------------------
Licensed by EDF under a 3-clause BSD-license
Copyright © EDF 2009 - 2023
BuildSysPro version 3.6.0
Author : EIFER, EDF (2011)
--------------------------------------------------------------
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Power | Pcombmin | 2220 | |
| Modelica.Units.SI.Power | Pcomb2 | 3330 | |
| Modelica.Units.SI.Power | Pcomb3 | 4550 | |
| Modelica.Units.SI.Power | Pcomb4 | 5680 | |
| Modelica.Units.SI.Power | Pcombmax | 7650 |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | Tconsigne | Temperature wanted | |
| Modelica.Blocks.Interfaces.RealOutput | fraction_of_max_power | fraction of maximum power that the stove has to power out | |
| Modelica.Blocks.Interfaces.BooleanInput | presence | Indicates if the user is present in the house | |
| Modelica.Blocks.Interfaces.BooleanInput | marche_forcee | Indicates if "fixed power" mode is activated | |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | Tsens | Heat port connected to the room |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Power | Power_forced | Pcombmax | Power wanted in fixed power mode |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature | prescribedTemperature |