modelConstructionGeneral
General model of building constructions (walls, windows, roofs etc.)
Information
This is partial model description of a building construction.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Geometry › General | |||
| BuildingSystems.Buildings.Types.GeometryType | geometryType | BuildingSystems.Buildings.Types.GeometryType.Fixed | Fixed (default) or flexible geometry |
| Modelica.Units.SI.Length[3] | position | {0.0, 0.0, 0.0} | Position (if geometryType == Fixed) |
| Geometry › Dimension | |||
| Modelica.Units.SI.Length | width | 1.0 | Width (if geometryType == Fixed) |
| Modelica.Units.SI.Length | height | 1.0 | Height (if geometryType == Fixed) |
| Geometry › Orientation | |||
| Modelica.Units.NonSI.Angle_deg | angleDegAzi | 0.0 | Azimuth angle (if geometryType == Fixed) -> south: 0 deg, east: -90 deg, west +90 deg, north: 180 deg |
| Modelica.Units.NonSI.Angle_deg | angleDegTil | 90.0 | Tilt angle (if geometryType == Fixed) -> bottom: 0 deg, perpendicular: 90 deg, ceiling: 180 deg |
| General › Surfaces | |||
| BuildingSystems.Types.Absorptance | abs_1 | 0.5 | Short-wave absorptance side 1 |
| BuildingSystems.Types.Absorptance | abs_2 | 0.5 | Short-wave absorptance side 2 |
| Modelica.Units.SI.Emissivity | epsilon_1 | 0.9 | Long-wave emittance side 1 |
| Modelica.Units.SI.Emissivity | epsilon_2 | 0.9 | Long-wave emittance side 2 |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| BuildingSystems.Buildings.Interfaces.SurfaceToConstructionPort | toSurfacePort_1 | ||
| BuildingSystems.Buildings.Interfaces.SurfaceToConstructionPort | toSurfacePort_2 | Interface to surface on side 2 | |
| BuildingSystems.Interfaces.LengthOutput | width_internal | Width | |
| BuildingSystems.Interfaces.LengthInput | width_in | Width from input | |
| BuildingSystems.Interfaces.LengthOutput | height_internal | Height | |
| BuildingSystems.Interfaces.LengthInput | height_in | Height from input | |
| BuildingSystems.Interfaces.Angle_degOutput | angleDegAzi_internal | Azimuth angle | |
| BuildingSystems.Interfaces.Angle_degInput | angleDegAzi_in | Azimuth angle from input | |
| BuildingSystems.Interfaces.Angle_degOutput | angleDegTil_internal | Tilt angle | |
| BuildingSystems.Interfaces.Angle_degInput | angleDegTil_in | Tilt angle from input | |
| BuildingSystems.Interfaces.LengthOutput[3] | position_internal | Position | |
| BuildingSystems.Interfaces.LengthInput[3] | position_in | Position from input | |
| Modelica.Units.SI.Area | ASur | Surface area |
Revisions
-
April 24, 2019 by Christoph Nytsch-Geusen:
Adaptation to flexible geometries. -
May 23, 2015 by Christoph Nytsch-Geusen:
First implementation.