modelTriangularConstructionGeneral
General model of triangular building constructions (walls, windows, roofs etc.)
Information
This is partial model description of a triangular building construction.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Geometry › General | |||
| BuildingSystems.Buildings.Types.GeometryType | geometryType | BuildingSystems.Buildings.Types.GeometryType.Fixed | Fixed (default) or flexible geometry |
| Modelica.Units.SI.Length[3] | position | {0.0, 0.0, 0.0} | Position (if geometryType == Fixed and coordinateType == Local) |
| Geometry › Coordinates | |||
| BuildingSystems.Buildings.Types.CoordinateType | coordinateType | BuildingSystems.Buildings.Types.CoordinateType.Local | Local (default) or global |
| Modelica.Units.SI.Length[3,2] | verticesLocal | {{0.0, 0.0}, {0.0, 1.0}, {0.5, 1.0}} | Local 2D vertices (if geometryType == Fixed and coordinateType == Local) |
| Modelica.Units.SI.Length[3,3] | verticesGlobal | {{0.0, 0.0, 0.0}, {0.0, 1.0, 0.0}, {0.5, 1.0, 0.0}} | Global 3D vertices (if geometryType == Fixed and coordinateType == Global) |
| Geometry › Orientation | |||
| Modelica.Units.NonSI.Angle_deg | angleDegAzi | 0.0 | Azimuth angle (if geometryType == Fixed and coordinateType = Local) -> south: 0 deg, east: -90 deg, west +90 deg, north: 180 deg |
| Modelica.Units.NonSI.Angle_deg | angleDegTil | 90.0 | Tilt angle (if geometryType == Fixed and coordinateType = Local) -> bottom: 0 deg, perpendicular: 90 deg, ceiling: 180 deg |
| General › Surfaces | |||
| BuildingSystems.Types.Absorptance | abs_1 | 0.5 | Short-wave absorptance side 1 |
| BuildingSystems.Types.Absorptance | abs_2 | 0.5 | Short-wave absorptance side 2 |
| Modelica.Units.SI.Emissivity | epsilon_1 | 0.9 | Long-wave emittance side 1 |
| Modelica.Units.SI.Emissivity | epsilon_2 | 0.9 | Long-wave emittance side 2 |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| BuildingSystems.Buildings.Interfaces.SurfaceToConstructionPort | toSurfacePort_1 | ||
| BuildingSystems.Buildings.Interfaces.SurfaceToConstructionPort | toSurfacePort_2 | Interface to surface on side 2 | |
| BuildingSystems.Interfaces.LengthOutput[3,2] | verticesLocal_internal | Local 2D vertices | |
| BuildingSystems.Interfaces.LengthInput[3,2] | verticesLocal_in | Local 2D vertices from input | |
| BuildingSystems.Interfaces.LengthOutput[3,3] | verticesGlobal_internal | Global 3D vertices | |
| BuildingSystems.Interfaces.LengthInput[3,3] | verticesGlobal_in | Global 3D vertices from input | |
| BuildingSystems.Interfaces.Angle_degOutput | angleDegAzi_internal | Azimuth angle | |
| BuildingSystems.Interfaces.Angle_degInput | angleDegAzi_in | Azimuth angle from input | |
| BuildingSystems.Interfaces.Angle_degOutput | angleDegTil_internal | Tilt angle | |
| BuildingSystems.Interfaces.Angle_degInput | angleDegTil_in | Tilt angle from input | |
| BuildingSystems.Interfaces.LengthOutput[3] | position_internal | Position | |
| BuildingSystems.Interfaces.LengthInput[3] | position_in | Position from input | |
| Modelica.Units.SI.Area | ASur | Surface area |
Revisions
-
August 8, 2020 by Christoph Nytsch-Geusen:
First implementation.