modelBuilding1Zone0DDistrict
Low-order building model for district simulation
Extends from BuildingSystems.Buildings.BuildingTemplates.Building1Zone0D.
Information
This is a low-order building model for district simulation.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Area | ARoo | (length - thicknessFac)*(width - thicknessFac) | Roof area of the building |
| Modelica.Units.SI.Area | AFac | (2.0*(length - thicknessFac) + 2.0*(width - thicknessFac))*heightSto*nSto*(1.0 - fAreaAdjBld) - sum(AWin) | Opaque facade area of the building |
| Modelica.Units.SI.Area | AFloorSpace | width*length*nSto | Floor space area of the building |
| Real | AV | (2*length + 2*width + 2*length*width)/(length*width*heightSto*nSto) | Ratio area to volume |
| General | |||
| Integer | id | 1 | Building ID |
| General › Geometry building | |||
| Modelica.Units.SI.Length | length | 10.0 | Length of the building |
| Modelica.Units.SI.Length | width | 10.0 | Width of the building |
| Modelica.Units.SI.Length | thicknessFac | 0.4 | Mean thickness of the facade opaque construction |
| Modelica.Units.SI.Length | thicknessSla | 0.3 | Mean thickness of the slab construction between the floors |
| Real | fAreaAdjBld | 0.0 | Area reduction factor for common walls with adjacent buildings |
| Real | f_W_BGF | 0.75 | Relation living area (Wohnflaeche) to gross floor area (Bruttogrundflaeche) |
| Modelica.Units.SI.Length | heightSto | 3.0 | Brutto height of one storey |
| Real | nSto | 2.0 | Number of storeys |
| Constructions › Ambience constructions | |||
| Modelica.Units.SI.CoefficientOfHeatTransfer | UValFac | 1.0 | Mean heat loss coefficient of the opaque building facade |
| Constructions › Roof constructions | |||
| Modelica.Units.SI.CoefficientOfHeatTransfer | UValRoo | 1.0 | Mean heat loss coefficient of the building roof |
| Constructions › Thermal building capacity | |||
| BuildingSystems.Buildings.Types.ThermalBuildingCapacity | conAmb | BuildingSystems.Buildings.Types.ThermalBuildingCapacity.Medium | Thermal capacity outside construction |
| BuildingSystems.Buildings.Types.ThermalBuildingCapacity | conGro | BuildingSystems.Buildings.Types.ThermalBuildingCapacity.Medium | Thermal capacity building plate construction |
| BuildingSystems.Buildings.Types.ThermalBuildingCapacity | conInn | BuildingSystems.Buildings.Types.ThermalBuildingCapacity.Medium | Thermal capacity inner building construction |
| General › Geometry windows | |||
| Real | fWin | 0.3 | Window percentage of the facades |
Revisions
-
April 23, 2018 by Christoph Nytsch-Geusen:
Improvement of the building geometry model. -
March 4, 2018 by Christoph Nytsch-Geusen:
Area reduction factor for common walls of adjacent buildings introduced. -
May 23, 2015 by Christoph Nytsch-Geusen:
First implementation.