modelCase600
Case 600FF, but with dual-setpoint for heating and cooling
Extends from Modelica.Icons.Example.
Information
This model is used for the basic test case 600 of the BESTEST validation suite. Case 600 is a light-weight building with room temperature control set to 20°C for heating and 27°C for cooling. The room has no shade and a window that faces south.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Math.Sum | sumHeaCoo | Sum of heating and cooling heat flow rate | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow | preHeaCoo | Prescribed heat flow for heating and cooling | |
| Modelica.Blocks.Math.Gain | gaiHea | Gain for heating | |
| BuildingSystems.Controls.Continuous.LimPID | conHeaPID | Controller for heating | |
| Modelica.Blocks.Sources.Constant | TSetHea | Set-point for heating | |
| Modelica.Blocks.Sources.Constant | TSetCoo | Set-point for cooling | |
| Modelica.Blocks.Routing.Multiplex2 | multiplex2 | ||
| Modelica.Blocks.Math.Gain | gaiCoo | Gain for cooling | |
| BuildingSystems.Controls.Continuous.LimPID | conCooPID | Controller for cooling | |
| Modelica.Blocks.Continuous.Integrator | ECoo | Cooling energy in Joules | |
| Modelica.Blocks.Continuous.Integrator | EHea | Heating energy in Joules | |
| Modelica.Blocks.Sources.CombiTimeTable | daiComBESTEST | Daily comparison BESTEST | |
| Zone5R1C.Zone | zon5R1C | ||
| Modelica.Blocks.Sources.Constant | intGai | Internal heat gains | |
| BoundaryConditions.WeatherData.ReaderTMY3 | weaDat | Weather data | |
| BuildingSystems.ThermalZones.ISO13790.Validation.BESTEST.Data.Case600Results | annComBESTEST | Annual comparison BESTEST |
Revisions
-
Mar 16, 2022, by Alessandro Maccarini:
First implementation.