modelPartialAirHandlerMassFlow
Partial model for testing air handler at variable mass flowrate
Information
Partial model for testing the air handling unit model with given control signals.
Parameters
| Type | Name | Default | Description |
|---|
| Modelica.Units.SI.MassFlowRate | m1_flow_nominal | 2.9 | Nominal mass flow rate |
| Modelica.Units.SI.MassFlowRate | m2_flow_nominal | 3.3 | Nominal mass flow rate |
| Modelica.Units.SI.Temperature | T_a1_nominal | 6 + 273.15 | Nominal water inlet temperature |
| Modelica.Units.SI.Temperature | T_b1_nominal | 11 + 273.15 | Nominal water outlet temperature |
| Modelica.Units.SI.Temperature | T_a2_nominal | 26 + 273.15 | Nominal air inlet temperature |
| Modelica.Units.SI.Temperature | T_b2_nominal | 12 + 273.15 | Nominal air outlet temperature |
Components
| Type | Name | Default | Description |
|---|
| Buildings.Fluid.Sources.Boundary_pT | sin_2 | | Sink for air |
| Buildings.Fluid.Sources.Boundary_pT | sou_2 | | Source for air |
| Buildings.Fluid.Sources.MassFlowSource_T | sin_1 | | Source for water |
| Buildings.Fluid.Sources.Boundary_pT | sou_1 | | Sink for water |
| Modelica.Blocks.Sources.Constant | relHum | | Relative humidity |
| Buildings.Utilities.Psychrometrics.X_pTphi | x_pTphi | | |
| Modelica.Blocks.Sources.Constant | temSou_2 | | Temperature boundary condition |
| Modelica.Blocks.Math.Gain | mWat_flow | | Water mass flow rate |
| Modelica.Blocks.Sources.TimeTable | mWatGai | | Gain for water mass flow rate |
| Buildings.Fluid.Sensors.TemperatureTwoPort | temSenWat1 | | Temperature sensor for water |
| Buildings.Fluid.Sensors.TemperatureTwoPort | temSenWat2 | | Temperature sensor for water |
| Buildings.Fluid.Sensors.TemperatureTwoPort | temSenAir2 | | Temperature for air |
Contents
| Name | Description |
|---|
| Medium1 | Medium model for water |
| Medium2 | Medium model for air |
Revisions
-
May 10, 2017 by Yangyang Fu:
First implementation.