modelIntegratedPrimaryLoadSide
Integrated WSE on the load side in a primary-only chilled water system
Extends from Modelica.Icons.Example, Buildings.Applications.DataCenters.ChillerCooled.Equipment.Validation.BaseClasses.PartialPlant.
Information
This example demonstrates how the model responses according to different cooling mode signals (free cooling mode, partially mechanical cooling and fully mechanical cooling).
The reponses are also compared with a second case where the PI controller in the WSE is reset every 1800s.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Fluid.Movers.Data.Generic | perPum | Pump performance data |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Applications.DataCenters.ChillerCooled.Equipment.IntegratedPrimaryLoadSide | intWSEPri1 | Integrated waterside economizer on the load side of the primary-only chilled water system | |
| Modelica.Blocks.Sources.Constant | yPum | Conrol signal for pumps | |
| Modelica.Blocks.Sources.RealExpression | yVal5 | On/off signal for valve 5 | |
| Modelica.Blocks.Sources.RealExpression | yVal6 | On/off signal for valve 6 | |
| Buildings.Fluid.Sources.Boundary_pT | sou2 | Source on medium 2 side | |
| Buildings.Applications.DataCenters.ChillerCooled.Equipment.IntegratedPrimaryLoadSide | intWSEPri2 | Integrated waterside economizer on the load side of the primary-only chilled water system with PI controller reset | |
| Buildings.Fluid.Sensors.TemperatureTwoPort | TSup2 | ||
| Modelica.Blocks.Sources.BooleanPulse | tri | Trigger controller reset |
Revisions
-
April 14, 2022, by Michael Wetter:
Avoided duplicate model instances with different declarations.
This is for issue 2963. -
January 28, 2019, by Yangyang Fu:
Added test case for PI controller reset. -
January 12, 2019, by Michael Wetter:
Removed wrong use ofeach. -
September 11, 2017, by Michael Wetter:
Corrected wrong use of replaceable model in the base class.
This is for issue 921. -
July 22, 2017, by Yangyang Fu:
First implementation.