modelRoomLeakage
Room leakage model
Extends from Buildings.BaseClasses.BaseIcon.
Information
Room leakage.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Volume | VRoo | Room volume | |
| Boolean | use_windPressure | false | Set to true to enable wind pressure |
| Real | s | Side ratio, s=length of this wall/length of adjacent wall | |
| Modelica.Units.SI.Angle | azi | Surface azimuth (South:0, West:pi/2) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.FixedResistances.PressureDrop | res | Resistance model | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b | ||
| Buildings.Fluid.Sources.Outside_CpLowRise | amb | ||
| BoundaryConditions.WeatherData.Bus | weaBus | Bus with weather data | |
| Buildings.Fluid.Sensors.MassFlowRate | senMasFlo1 | Sensor for mass flow rate | |
| Modelica.Blocks.Math.Gain | ACHInf | Air change per hour due to infiltration |
Contents
| Name | Description |
|---|---|
| Medium | Medium in the component |
Revisions
-
July 20, 2007 by Michael Wetter:
First implementation.