modelScrollWaterToWater_Dynamic
Test model for scroll water to water heat pump
Extends from Modelica.Icons.Example.
Information
Model that demonstrates the use of the Buildings.Fluid.HeatPumps.ScrollWaterToWater heat pump model. This validation case also tests the stage input to the heat pump models.
With constant inlet source and load water temperatures, the heat pumps cycle on and off. The apparent capacity of the dynamic model is compared to the steady-state model and to the condenser heat transfer rate.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m1_flow_nominal | 0.47 | Nominal mass flow rate on the condenser side |
| Modelica.Units.SI.MassFlowRate | m2_flow_nominal | 0.47 | Nominal mass flow rate on the evaporator side |
| Modelica.Units.SI.MassFlowRate | flowSource | 0.79 | Mass flow rate on the condenser side |
| Modelica.Units.SI.MassFlowRate | flowLoad | 0.47 | Mass flow rate on the evaporator side |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.Sources.Boundary_pT | sin2 | Source side sink | |
| Buildings.Fluid.Sources.Boundary_pT | sin1 | Load side sink | |
| Modelica.Fluid.Sources.MassFlowSource_T | loa | Load side flow source | |
| Modelica.Fluid.Sources.MassFlowSource_T | sou | Source side flow source | |
| Modelica.Blocks.Sources.RealExpression | mLoa | Load side mass flwo rate | |
| Modelica.Blocks.Sources.RealExpression | mSou | Source side mass flow rate | |
| Buildings.Fluid.HeatPumps.ScrollWaterToWater | heaPum | Scroll water to water heat pump | |
| Buildings.Fluid.HeatPumps.ScrollWaterToWater | heaPum1 | Scroll water to water heat pump with transient effects | |
| Modelica.Blocks.Sources.Pulse | N | Heat pump control signal | |
| Modelica.Fluid.Sources.MassFlowSource_T | loa1 | Load side flow source | |
| Modelica.Fluid.Sources.MassFlowSource_T | sou1 | Source side flow source | |
| Modelica.Blocks.Sources.Constant | TLoa | Load side fluid temperature | |
| Modelica.Blocks.Sources.Constant | TSou | Source side fluid temperature | |
| Modelica.Blocks.Sources.RealExpression | appCap | Apparent capacity of the heat pump | |
| Modelica.Blocks.Math.RealToInteger | realToInteger |
Contents
| Name | Description |
|---|---|
| Medium1 | Medium model |
| Medium2 | Medium model |
Revisions
-
May 15, 2019, by Jianjun Hu:
Replaced fluid source. This is for #1072. -
November 11, 2016, by Massimo Cimmino:
First implementation.