modelHumidifier
Wrapper for the humidifier component with two-port sensors
Extends from Buildings.Fluid.Interfaces.PartialTwoPortInterface.
Parameters
| Type | Name | Default | Description |
|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | | Nominal mass flow rate |
| Modelica.Units.SI.PressureDifference | dp_nominal | | Nominal pressure difference |
| Modelica.Units.SI.MassFlowRate | mWat_flow_nominal | | Nominal water mass flow rate |
| Dynamics › Conservation equations |
| Modelica.Fluid.Types.Dynamics | energyDynamics | Modelica.Fluid.Types.Dynamics.DynamicFreeInitial | Type of energy balance: dynamic (3 initialization options) or steady state |
Components
| Type | Name | Default | Description |
|---|
| Buildings.Fluid.Humidifiers.Humidifier_u | hum | | Humidifier |
| Buildings.Fluid.Sensors.TemperatureTwoPort | T_a | | Temperature at port_a |
| Buildings.Fluid.Sensors.TemperatureTwoPort | T_b | | Temperature at port_a |
| Modelica.Blocks.Interfaces.RealInput | u | | Control input |
| Modelica.Blocks.Interfaces.RealOutput | mWat_flow | | Water added to the fluid |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | heatPort | | Heat port for total heat exchange with the control volume |
| Buildings.Fluid.Sensors.MassFractionTwoPort | X_a | | Mass fraction at port_a |
| Buildings.Fluid.Sensors.MassFractionTwoPort | X_b | | Mass fraction at port_b |
Contents
| Name | Description |
|---|
| Medium | Medium model |