modelWaterBasedHeating
Hot water coil
Extends from Buildings.Templates.Components.Interfaces.PartialCoil.
Information
This is a model for a hot water coil with an optional
modulating valve.
The valve position is modulated with the fractional opening
signal y (real between 0 and 1).
If no valve is used, no signal is required.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | mWat_flow_nominal | dat.mWat_flow_nominal | Liquid mass flow rate |
| Modelica.Units.SI.PressureDifference | dpWat_nominal | dat.dpWat_nominal | Liquid pressure drop across coil |
| Modelica.Units.SI.PressureDifference | dpValve_nominal | dat.dpValve_nominal | Nominal pressure drop across fully open valve |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Templates.Components.Actuators.Valve | val | Valve | |
| Buildings.Fluid.HeatExchangers.DryCoilEffectivenessNTU | hex | ||
| Buildings.Templates.Components.Routing.PassThroughFluid | pas | Direct pass through | |
| Buildings.Fluid.FixedResistances.Junction | jun | Junction |
Contents
| Name | Description |
|---|---|
| MediumHeaWat | Source side medium |