modelPartialPumpMultiple
Interface class for multiple pumps in parallel arrangement
Extends from Buildings.Templates.Components.Interfaces.PartialPump.
Information
This partial class provides a standard interface for models of multiple pumps in parallel arrangement. Note that the inlet and outlet manifolds are not included in this model. This way, the same interface can be used to model both headered pumps and dedicated pumps.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Templates.Components.Data.PumpMultiple | dat | Design and operating parameters | |
| Configuration | |||
| Integer | nPum | Number of pumps | |
| Nominal condition | |||
| Modelica.Units.SI.MassFlowRate[nPum] | m_flow_nominal | dat.m_flow_nominal | Nominal mass flow rate |
| Modelica.Units.SI.PressureDifference[nPum] | dp_nominal | dat.dp_nominal | Pump head at design conditions |
| Modelica.Units.SI.PressureDifference[nPum] | dpValChe_nominal | fill(Buildings.Templates.Data.Defaults.dpValChe, nPum) | Check valve pressure drop at design conditions |
| Graphics | |||
| Integer | icon_dy | 300 | Distance in y-direction between each unit in icon layer |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPorts_a[nPum] | ports_a | Vectorized fluid connector a (positive design flow direction is from port(s)_a to port(s)_b) | |
| Modelica.Fluid.Interfaces.FluidPorts_b[nPum] | ports_b | Vectorized fluid connector b (positive design flow direction is from port(s)_a to port(s)_b) |
Contents
| Name | Description |
|---|---|
| Medium |
Revisions
-
April 28, 2023, by Antoine Gautier:
First implementation.