modelSingleZoneFloorHeater
A model with an ideal heater, a fan, a PI controller and an integrator
Extends from Buildings.Fluid.Interfaces.PartialTwoPortInterface.
Information
This model includes an ideal heater, a fan, a PI controller and an integrator for the heating energy. It is used in the validation model Buildings.ThermalZones.Detailed.Validation.SingleZoneFloorWithHeating.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Volume | VRoo | Room air volume | |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | Nominal mass flowrate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Controls.OBC.CDL.Interfaces.RealInput | TSetRoo | Room setpoint temperature | |
| Buildings.Controls.OBC.CDL.Interfaces.RealOutput | yEHea | Heating energy | |
| Buildings.Controls.OBC.CDL.Interfaces.RealInput | TRooMea | Measured room temperature | |
| Buildings.Controls.OBC.CDL.Reals.PID | conPID | Controller for heater | |
| Buildings.Controls.OBC.CDL.Reals.MultiplyByParameter | gai | Gain factor | |
| Buildings.Controls.OBC.CDL.Reals.AddParameter | addPar | Compute the leaving water setpoint temperature | |
| Fluid.HeatExchangers.Heater_T | hea | Ideal heater | |
| Fluid.Movers.FlowControlled_m_flow | fan | Fan | |
| Modelica.Blocks.Continuous.Integrator | EHea | Heating energy |
Contents
| Name | Description |
|---|---|
| Medium | Medium model for air |
Revisions
- March 28, 2020, by Kun Zhang:
First implementation.