modelZone
Model of a thermal zone
Extends from Modelica.Blocks.Icons.Block.
Parameters
| Type | Name | Default | Description |
|---|
| String | zoneName | "" | Name of the thermal zone |
| Modelica.Units.SI.MassFlowRate | mOut_flow | 0.3/3600*zon.V*Buildings.Media.Air.dStp | Outside air mass flow rate with 0.3 ACH |
Components
| Type | Name | Default | Description |
|---|
| Modelica.Blocks.Sources.Constant | qConGai_flow | | Convective heat gain |
| Modelica.Blocks.Sources.Constant | qRadGai_flow | | Radiative heat gain |
| Modelica.Blocks.Routing.Multiplex3 | multiplex3_1 | | Multiplex to combine signals into a vector |
| Buildings.ThermalZones.EnergyPlus_24_2_0.ThermalZone | zon | | Thermal zone (core zone of the office building with 5 zones) |
| Buildings.Fluid.FixedResistances.PressureDrop | duc | | Duct resistance (to decouple room and outside pressure) |
| Buildings.Fluid.Sources.MassFlowSource_WeatherData | bou | | Mass flow rate boundary condition |
| Buildings.Fluid.Sources.Boundary_pT | freshAir | | Pressure boundary condition |
| Modelica.Blocks.Sources.Constant | qLatGai_flow | | Latent heat gain |
| Buildings.Fluid.Sensors.RelativeHumidity | senRelHum | | Relative humidity in the room as computed by Modelica |
| Modelica.Blocks.Interfaces.RealOutput | TAir | | Air temperature of the zone |
| Modelica.Blocks.Interfaces.RealOutput | TRad | | Radiative temperature of the zone |
| Modelica.Blocks.Interfaces.RealOutput | phi | | Relative humidity of zone air |
| BoundaryConditions.WeatherData.Bus | weaBus | | Bus with weather data |
Contents
| Name | Description |
|---|
| Medium | Medium model |