modelCoalSupplyBoiler_01_XRG
Extends from ClaRa.Components.Control.PredictorModels_3508.Icons.BoilerPredictor (An icon for a boiler model - relative units ('p.u.')), ClaRa.Basics.Icons.ComplexityLevel (Displays the complexity level inside model icon ).
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011-2024.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed by ClaRa development team under the 3-clause BSD License.
Acknowledgements:ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
The ClaRa development team consists of the following partners:
TLK-Thermo GmbH (Braunschweig, Germany)
XRG Simulation GmbH (Hamburg, Germany).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Fundamental Definitions | |||
| TILMedia.VLEFluid.Types.BaseVLEFluid | medium | simCenter.fluid1 | Medium in the component |
| Nominal values | |||
| ClaRa.Basics.Units.Pressure | p_LS_nom | 300e5 | Nominal life steam pressure |
| ClaRa.Basics.Units.Pressure | Delta_p_nom | 40e5 | Nominal life steam pressure loss |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_LS_nom | 3279e3 | Nominal life steam specific enthalpy |
| ClaRa.Basics.Units.MassFlowRate | m_flow_LS_nom | 419 | Nominal life steam flow rate |
| Part Load Definition | |||
| Real[:,:] | CL_mflowLS_QF_ | [0, 0.32; 0.34, 0.32; 1, 1] | Characteristic line life steam flow as function of thermal output |
| Real[:,:] | CL_pLS_QF_ | [0, 0.32; 0.34, 0.32; 1, 1] | Characteristic line life steam pressure as function of thermal output |
| Real[:,:] | CL_Valve_ | [0, 0; 1, 1] | Characteristics of the turbine valve |
| Real[:,:] | CL_Deltap_mflowLS_ | [0, 0; 0.1, 0.01; 0.2, 0.04; 0.3, 0.09; 0.4, 0.16; 0.5, 0.25; 0.6, 0.36; 0.7, 0.49; 0.8, 0.64; 0.9, 0.81; 1, 1] | Characteristic line of life steam pressure drop as function of mass flow rate |
| Real[:,:] | CL_hEvap_pD_ | [0.34, 2806e3; 0.55, 2708e3; 0.75, 2559e3; 1, 2200e3] | Characteristic line evap outlet enthalpy over pressure |
| Time Response Definition | |||
| ClaRa.Basics.Units.Time | tau_u | 120 | equivalent dead time of steam generation |
| ClaRa.Basics.Units.Time | Tau_g | 200 | balancing time of steam generation |
| ClaRa.Basics.Units.Time | Tau_s | 200 | Integration time of steam storage |
| ClaRa.Basics.Units.Time | Tau_evap | 5 | Time constant for energy storage in evaporator |
| Control Definition | |||
| Real | y_T_const | 1 | Constant turbine valve aperture |
| Initialisation | |||
| Real | p_LS_0 | 1 | Initial value of life steam pressure in p.u. |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | yT_ | Turbine valve aperture | |
| Modelica.Blocks.Interfaces.RealInput | QF_setl_ | Set value of thermal output in p.u. | |
| Basics.Interfaces.SteamSignal | steamSignal | ||
| Modelica.Blocks.Interfaces.RealOutput | m_StG_ | Mass flow rate of steam generation in p.u. | |
| Modelica.Blocks.Interfaces.RealOutput | p_LS_ | Connector of Real output signal |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| String | complexity (from ComplexityLevel) | "??" | |
| ClaRa.SimCenter | simCenter | ||
| ClaRa.Basics.Units.Temperature | T_LS | 823.15 | Value of life steam temperature |
| ClaRa.Basics.Units.Pressure | p_LS | Life steam pressure | |
| Modelica.Blocks.Continuous.LimIntegrator | SteamStorage | A simple way to model the mass storage in the boiler | |
| Modelica.Blocks.Math.Feedback | feedback | ||
| Modelica.Blocks.Continuous.TransferFunction | heatRelease | comprehends the coal supply, the heat release and the steam generation | |
| Modelica.Blocks.Math.Product | turbineValve | Effect of steam flow throtteling | |
| Modelica.Blocks.Tables.CombiTable1Dv | turbineValveCaracteristics | ||
| Modelica.Blocks.Tables.CombiTable1Dv | convert2LifeSteamFlow | ||
| Modelica.Blocks.Tables.CombiTable1Dv | convert2LifeSteamPressure | ||
| Modelica.Blocks.Tables.CombiTable1Dv | convert2PressureDrop | ||
| EnthalpyPredictor | enthalpyPredictor |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.