modelDenitrification_L2
Extends from ClaRa.Basics.ControlVolumes.GasVolumes.VolumeGas_L2_chem (A 0-d control volume for flue gas with chemical reactions), ClaRa.Basics.Icons.Separator.
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011-2024.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed by ClaRa development team under the 3-clause BSD License.
Acknowledgements:ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
The ClaRa development team consists of the following partners:
TLK-Thermo GmbH (Braunschweig, Germany)
XRG Simulation GmbH (Hamburg, Germany).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_start (from VolumeGas_L2_chem) | TILMedia.Gas.Functions.specificEnthalpy_pTxi(medium, p_start, T_start, xi_start) | Start value of system specific enthalpy |
| Basics.Units.Length | height | 1 | Height of the component |
| Basics.Units.Length | width | 1 | Width of the component |
| Basics.Units.Length | length | 1 | Length of the component |
| Fundamental Definitions | |||
| TILMedia.Gas.Types.BaseGas | medium (from VolumeGas_L2_chem) | simCenter.flueGasModel | Medium to be used in tubes |
| Initialisation | |||
| Boolean | useHomotopy (from VolumeGas_L2_chem) | simCenter.useHomotopy | True, if homotopy method is used during initialisation |
| Integer | initOption (from VolumeGas_L2_chem) | 0 | Type of initialisation |
| ClaRa.Basics.Units.Temperature | T_start (from VolumeGas_L2_chem) | 273.15 + 100.0 | Start value of system temperature |
| ClaRa.Basics.Units.Pressure | p_start (from VolumeGas_L2_chem) | 1.013e5 | Start value of sytsem pressure |
| ClaRa.Basics.Units.MassFraction[medium.nc - 1] | xi_start (from VolumeGas_L2_chem) | medium.xi_default | Start value of system mass fraction |
| Advanced | |||
| Boolean | allow_reverseFlow (from VolumeGas_L2_chem) | true | |
| Boolean | use_dynamicMassbalance (from VolumeGas_L2_chem) | true | |
| Geometry | |||
| Integer | heatSurfaceAlloc (from VolumeGas_L2_chem) | 1 | Heat transfer area to be considered |
| General › Nominal Values | |||
| ClaRa.Basics.Units.MassFlowRate | m_flow_nom (from VolumeGas_L2_chem) | 10 | Nominal mass flow rates at inlet |
| Nominal Values | |||
| ClaRa.Basics.Units.Pressure | p_nom (from VolumeGas_L2_chem) | 1e5 | Nominal pressure |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_nom (from VolumeGas_L2_chem) | 1e5 | Nominal specific enthalpy |
| Units.MassFraction[medium.nc - 1] | xi_nom (from VolumeGas_L2_chem) | medium.xi_default | Nominal gas composition |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.Basics.Interfaces.GasPortIn | inlet (from VolumeGas_L2_chem) | Inlet port | |
| ClaRa.Basics.Interfaces.GasPortOut | outlet (from VolumeGas_L2_chem) | Outlet port | |
| ClaRa.Basics.Interfaces.HeatPort_a | heat (from VolumeGas_L2_chem) | heat port | |
| Modelica.Blocks.Interfaces.RealInput | U_input (from VolumeGas_L2_chem) | Applied Voltage leading to E_applied=U_applied/d | |
| Basics.Interfaces.EyeOutGas | eyeOut |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.SimCenter | simCenter (from VolumeGas_L2_chem) | ||
| HeatTransfer | heattransfer (from VolumeGas_L2_chem) | ||
| Geometry | geo (from VolumeGas_L2_chem) | Cell geometry | |
| PressureLoss | pressureLoss (from VolumeGas_L2_chem) | Pressure loss model | |
| ChemicalReactions | chemicalReactions (from VolumeGas_L2_chem) | Chemical reaction model | |
| TILMedia.Gas.Gas_pT | flueGasInlet (from VolumeGas_L2_chem) | ||
| TILMedia.Gas.Gas_pT | flueGasOutlet (from VolumeGas_L2_chem) | ||
| TILMedia.Gas.Gas_ph | bulk (from VolumeGas_L2_chem) | ||
| Modelica.Blocks.Sources.Constant | U_input_ (from VolumeGas_L2_chem) | ||
| Summary | summary (from VolumeGas_L2_chem) | ||
| Fundamentals.ChemicalReactions.reactionsInput | reactionsInput (from VolumeGas_L2_chem) |
Contents
| Name | Description |
|---|---|
 SeparationModel |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.