| General › Fundamental Definitions |
| TILMedia.Gas.Types.BaseGas | gas (from Mill_L4) | simCenter.flueGasModel | Medium model |
| ClaRa.Basics.Media.FuelTypes.BaseFuel | fuelModel (from Mill_L4) | simCenter.fuelModel1 | Coal elemental composition used for combustion |
| Volumes.Fundamentals.Records.FuelClassification_base | classification (from Mill_L4) | Volumes.Fundamentals.Records.FuelClassification_example_21classes() | Classification record |
| ClaRa.Basics.Units.MassFraction[classification.N_class - 1] | classFraction (from Mill_L4) | ((1/classification.N_class)*ones(classification.N_class - 1)) | Particle class mass fraction |
| General › Global nominal values |
| ClaRa.Basics.Units.MassFlowRate | m_flow_fuel_nom (from Mill_L4) | 15.72 | nominal fuel mass flow rate |
| ClaRa.Basics.Units.MassFlowRate | m_flow_gas_nom (from Mill_L4) | 21.68 | nominal gas mass flow rate |
| ClaRa.Basics.Units.Pressure | Delta_p_mill_nom (from Mill_L4) | 7500 | Nominal total Pressure Loss of Pulverizer |
| ClaRa.Basics.Units.Power | P_grinding_nom (from Mill_L4) | 460e3 | Nominal electrical Power |
| ClaRa.Basics.Units.Mass | mass_mill (from Mill_L4) | 116e3 | Total mass of mill construction |
| Grinder › Geometry |
| ClaRa.Basics.Units.Length | radius_table (from Mill_L4) | 0.5*(2.44 - 0.4) | outer radius of the grinding table; center table to center roll! |
| ClaRa.Basics.Units.Length | radius_chute (from Mill_L4) | 0.5*0.817 | radius of recirculation tube of classifier |
| Grinder › Initialization |
| ClaRa.Basics.Units.MassFraction[fuelModel.N_c - 1] | xi_grinder_start (from Mill_L4) | zeros(fuelModel.N_c - 1) | initial fuel composition |
| ClaRa.Basics.Units.MassFraction[classification.N_class - 1] | classFraction_grinder_start (from Mill_L4) | (1/classification.N_class)*ones(classification.N_class - 1) | start value for total class fraction of ALL inlets |
| ClaRa.Basics.Units.Temperature | T_grinder_start (from Mill_L4) | simCenter.T_amb_start | initial temperature in fuel controll volume |
| Real | recirculation_rate_grinder_start (from Mill_L4) | 15 | initial m_flow_out/m_flow_in1 kg/kg |
| Dryer › Initialization |
| ClaRa.Basics.Units.Mass | mass_content_start (from Mill_L4) | 100 | Initial mass in drying zone |
| ClaRa.Basics.Units.MassFlowRate | m_flow_H2O_evap_start (from Mill_L4) | 1.5 | initianl mass flow rate of evaporated coal H2O |
| ClaRa.Basics.Units.Temperature | T_dryer_start (from Mill_L4) | simCenter.T_amb_start | initial temperature in fuel controll volume |
| ClaRa.Basics.Units.Pressure | p_dryer_start (from Mill_L4) | simCenter.p_amb_start | Initial value for air pressure |
| ClaRa.Basics.Units.MassFraction[gas.nc - 1] | xi_dryer_gas_in_start (from Mill_L4) | zeros(gas.nc - 1) | initial gas composition |
| ClaRa.Basics.Units.MassFraction[gas.nc - 1] | xi_dryer_gas_out_start (from Mill_L4) | zeros(gas.nc - 1) | initial gas composition |
| Transport › Geometry |
| ClaRa.Basics.Units.Length | height_transport (from Mill_L4) | 4.6 | length of transport volume |
| ClaRa.Basics.Units.Area | A_cross_transport (from Mill_L4) | 6.43 | cross section of transport volume |
| Transport › Initialization |
| ClaRa.Basics.Units.Mass | mass_transport_start (from Mill_L4) | 24 | total initial fuel mass |
| ClaRa.Basics.Units.MassFraction[classification.N_class - 1] | classFraction_transport_start (from Mill_L4) | (1/classification.N_class)*ones(classification.N_class - 1) | start value for total class fraction in control volume |
| ClaRa.Basics.Units.MassFraction[fuelModel.N_c - 1] | xi_transport_fuel_start (from Mill_L4) | zeros(fuelModel.N_c - 1) | initial fuel composition |
| Modelica.Units.SI.Pressure | p_transport_start (from Mill_L4) | simCenter.p_amb_start | initial value of gas sytsem pressure |
| ClaRa.Basics.Units.Temperature | T_transport_start (from Mill_L4) | 273.15 + 100 | initial temperature |
| ClaRa.Basics.Units.MassFraction[gas.nc - 1] | xi_transport_gas_start (from Mill_L4) | zeros(gas.nc - 1) | initial gas composition |
| Classifier › Geometry |
| ClaRa.Basics.Units.Length | radius_classifier_outer (from Mill_L4) | 0.5*3.33 | outer radius of classifier (inlet) |
| ClaRa.Basics.Units.Length | radius_classifier_inner (from Mill_L4) | 0.5*0.817 | inner radius of classifier (outlet) |
| ClaRa.Basics.Units.Length | height_classifier (from Mill_L4) | 2 | height of classifier; considered as CONSTANT against radius |
| Classifier › Initialization |
| ClaRa.Basics.Units.Mass | mass_classifier_start (from Mill_L4) | 24 | total initial fuel mass |
| ClaRa.Basics.Units.MassFraction[classification.N_class - 1] | classFraction_classifier_start (from Mill_L4) | (1/classification.N_class)*ones(classification.N_class - 1) | intitial value for total class fraction in control volume |
| ClaRa.Basics.Units.MassFraction[fuelModel.N_c - 1] | xi_classifier_fuel_start (from Mill_L4) | zeros(fuelModel.N_c - 1) | initial fuel composition |
| Modelica.Units.SI.Pressure | p_classifier_start (from Mill_L4) | simCenter.p_amb_start | initial value of gas sytsem pressure |
| ClaRa.Basics.Units.Temperature | T_classifier_start (from Mill_L4) | 273.15 + 100 | initial temperature |
| ClaRa.Basics.Units.MassFraction[gas.nc - 1] | xi_classifier_gas_start (from Mill_L4) | zeros(gas.nc - 1) | initial gas composition |
