| Integer | NbSwitchOffSignalsSide1 (from SwitchOffLogicSide1) | | Number of switch-off signals to take into account in inputs |
| Boolean | SwitchOffSignal1Side10 (from SwitchOffLogicSide1) | false | Initial switch-off signal 1 for side 1 of the quadripole |
| Boolean | SwitchOffSignal2Side10 (from SwitchOffLogicSide1) | false | Initial switch-off signal 2 for side 1 of the quadripole |
| Boolean | SwitchOffSignal3Side10 (from SwitchOffLogicSide1) | false | Initial switch-off signal 3 for side 1 of the quadripole |
| Boolean | RunningSide10 (from SwitchOffLogicSide1) | if NbSwitchOffSignalsSide1 >= 3 then not (SwitchOffSignal1Side10 or SwitchOffSignal2Side10 or SwitchOffSignal3Side10) elseif NbSwitchOffSignalsSide1 >= 2 then not (SwitchOffSignal1Side10 or SwitchOffSignal2Side10) else not SwitchOffSignal1Side10 | Indicates if the component is initially running on side 1 or not |
| Integer | NbSwitchOffSignalsSide2 (from SwitchOffLogicSide2) | | Number of switch-off signals to take into account in inputs |
| Boolean | SwitchOffSignal1Side20 (from SwitchOffLogicSide2) | false | Initial switch-off signal 1 for side 2 of the quadripole |
| Boolean | SwitchOffSignal2Side20 (from SwitchOffLogicSide2) | false | Initial switch-off signal 2 for side 2 of the quadripole |
| Boolean | SwitchOffSignal3Side20 (from SwitchOffLogicSide2) | false | Initial switch-off signal 3 for side 2 of the quadripole |
| Boolean | RunningSide20 (from SwitchOffLogicSide2) | if NbSwitchOffSignalsSide2 >= 3 then not (SwitchOffSignal1Side20 or SwitchOffSignal2Side20 or SwitchOffSignal3Side20) elseif NbSwitchOffSignalsSide2 >= 2 then not (SwitchOffSignal1Side20 or SwitchOffSignal2Side20) else not SwitchOffSignal1Side20 | Indicates if the component is initially running on side 2 or not |
| Constants.state | State0 (from SwitchOffDCLine) | Constants.state.Closed | Start value of connection state |
| Real | KLosses (from BaseHvdc) | | Losses coefficient between 0 and 1 : 1 if no loss in the HVDC link, < 1 otherwise |
| Types.ActivePowerPu | PMaxPu (from BaseHvdc) | | Maximum active power in pu (base SnRef) flowing through the HVDC link |
| Types.ComplexCurrentPu | i10Pu (from BaseHvdc) | | Start value of complex current at terminal 1 in pu (base UNom, SnRef) (receptor convention) |
| Types.ActivePowerPu | P1Ref0Pu (from BaseHvdc) | | Start value of active power reference at terminal 1 in pu (base SnRef) (receptor convention) |
| Types.ComplexApparentPowerPu | s10Pu (from BaseHvdc) | | Start value of complex apparent power at terminal 1 in pu (base SnRef) (receptor convention) |
| Types.ComplexVoltagePu | u10Pu (from BaseHvdc) | | Start value of complex voltage at terminal 1 in pu (base UNom) |
| Types.ComplexCurrentPu | i20Pu (from BaseHvdcP) | | Start value of complex current at terminal 2 in pu (base UNom, SnRef) (receptor convention) |
| Types.ComplexApparentPowerPu | s20Pu (from BaseHvdcP) | | Start value of complex apparent power at terminal 2 in pu (base SnRef) (receptor convention) |
| Types.ComplexVoltagePu | u20Pu (from BaseHvdcP) | | Start value of complex voltage at terminal 2 in pu (base UNom) |
| Types.Angle | UPhase10 (from BaseHvdcP) | | Start value of voltage angle and filtered voltage angle at terminal 1 in rad |
| Types.Angle | UPhase20 (from BaseHvdcP) | | Start value of voltage angle and filtered voltage angle at terminal 2 in rad |
| Types.ReactivePowerPu | Q1MaxPu (from BaseFixedReactiveLimitsDangling) | | Maximum reactive power in pu (base SnRef) at terminal 1 (generator convention) |
| Types.ReactivePowerPu | Q1MinPu (from BaseFixedReactiveLimitsDangling) | | Minimum reactive power in pu (base SnRef) at terminal 1 (generator convention) |
| Types.ReactivePowerPu | Q2MaxPu (from BaseFixedReactiveLimits) | | Maximum reactive power in pu (base SnRef) at terminal 2 (generator convention) |
| Types.ReactivePowerPu | Q2MinPu (from BaseFixedReactiveLimits) | | Minimum reactive power in pu (base SnRef) at terminal 2 (generator convention) |
| Boolean | limUQDown10 (from BaseQStatusDangling) | | Whether the minimum reactive power limits are reached or not at terminal 1, start value |
| Boolean | limUQUp10 (from BaseQStatusDangling) | | Whether the maximum reactive power limits are reached or not at terminal 1, start value |
| QStatus | q1Status0 (from BaseQStatusDangling) | | Start voltage regulation status of terminal 1: Standard, AbsorptionMax, GenerationMax |
| Boolean | limUQDown20 (from BaseQStatus) | | Whether the minimum reactive power limits are reached or not at terminal 2, start value |
| Boolean | limUQUp20 (from BaseQStatus) | | Whether the maximum reactive power limits are reached or not at terminal 2, start value |
| QStatus | q2Status0 (from BaseQStatus) | | Start voltage regulation status of terminal 2: Standard, AbsorptionMax, GenerationMax |
| Real | QPercent1 (from BasePQPropDangling) | | Percentage of the coordinated reactive control that comes from converter 1 |
| Real | QPercent2 (from BasePQProp) | | Percentage of the coordinated reactive control that comes from converter 2 |
| Boolean | modeU10 (from BaseVoltageRegulationDangling) | | Start value of the boolean assessing the mode of the control of converter 1 |
| Types.ReactivePowerPu | Q1Ref0Pu (from BaseVoltageRegulationDangling) | | Start value of reactive power regulation set point in pu (base SnRef) (receptor convention) at terminal 1 |
| Boolean | modeU20 (from BaseVoltageRegulation) | | Start value of the boolean assessing the mode of the control of converter 2 |
| Types.ReactivePowerPu | Q2Ref0Pu (from BaseVoltageRegulation) | | Start value of reactive power regulation set point in pu (base SnRef) (receptor convention) at terminal 2 |
