modelSMPM_MTPA2
Permanent magnet synchronous machine fed by current source, parameter record SMPM2
Extends from SMPM_MTPA1 (Permanent magnet synchronous machine fed by current source, parameter record SMPM1).
Information
Compare the simulation results of this simulation model with results calculated by SMPM_MTPA1.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | m (from SMPM_MTPA1) | 3 | Number of phases |
| Modelica.Units.SI.Voltage | VNominal (from SMPM_MTPA1) | 100 | Nominal RMS voltage per phase |
| Modelica.Units.SI.Frequency | fNominal (from SMPM_MTPA1) | 50 | Nominal frequency |
| Modelica.Units.SI.Frequency | f (from SMPM_MTPA1) | 50 | Actual frequency |
| Modelica.Units.SI.Time | tRamp (from SMPM_MTPA1) | 1 | Frequency ramp |
| Modelica.Units.SI.Torque | TLoad (from SMPM_MTPA1) | 181.4 | Nominal load torque |
| Modelica.Units.SI.Time | tStep (from SMPM_MTPA1) | 1.2 | Time of load torque step |
| Modelica.Units.SI.Inertia | JLoad (from SMPM_MTPA1) | 0.29 | Load's moment of inertia |
| Modelica.Units.SI.AngularVelocity | wNominal (from SMPM_MTPA1) | 2*pi*fNominal/smpmData1.p | Nominal angular velocity |
| Boolean | positiveRange (from SMPM_MTPA1) | false | Use positive range of angles, if true |
| HanserModelica.SynchronousMachines.ParameterRecords.SMPM1 | smpmData1 (from SMPM_MTPA1) | Data of synchronous machine SMPM_MTPA1 | |
| ParameterRecords.SMPM2 | smpmData2 (from SMPM_MTPA1) | Data of synchronous machine SMPM_MTPA2 |