modelPropertySource_T
Model for overriding fluid properties that flow through the component, using temperature input
Extends from IBPSA.Fluid.Sources.BaseClasses.PartialPropertySource.
Information
Model that changes the properties, but not the mass flow rate, of the fluid that passes through it.
If allowFlowReversal=true, then the properties are changed for both flow directions,
i.e., from port_a to port_b and
from port_b to port_a.
Typical use and important parameters
The fluid properties h, Xi and C
are only modified when the corresponding boolean parameter
use_T_in, use_Xi_in or use_C_in
is set to true.
Dynamics
This model has no dynamics.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Inputs | |||
| Boolean | use_T_in | false | Set to true to get the leaving fluid temperature from the input connector |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | T_in | Prescribed value for leaving fluid temperature |
Revisions
-
April 30, 2018, by Filip Jorissen:
First implementation. See #881.