modelPartialAirModel

Partial for air models

Extends from IDEAS.Fluid.Interfaces.LumpedVolumeDeclarations.

Information

Zone air model partial containing main parameters and connectors.

Type	Name	Default	Description
Integer	nSurf		Number of connected surfaces
Integer	nSeg	1	Number of air segments
Integer	nPorts		Number of fluid port connections to zone air volume
Modelica.Units.SI.Volume	Vtot		Total zone air volume
Modelica.Units.SI.MassFlowRate	m_flow_nominal		Nominal flow rate of the ventilation system
Advanced
Boolean	allowFlowReversal	true	= false to simplify equations, assuming, but not enforcing, no flow reversal

Type	Name	Description
IDEAS.BoundaryConditions.SimInfoManager	sim	Simulation information manager for climate data
Modelica.Blocks.Interfaces.RealOutput	E	Model internal energy
Modelica.Blocks.Interfaces.RealOutput	QGai	Model internal energy
Modelica.Blocks.Interfaces.RealOutput	TAir	Zone air temperature
Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a	ports_surf	Heat convection ports for surfaces
Modelica.Blocks.Interfaces.RealInput	inc	Inclination angle of surface
Modelica.Blocks.Interfaces.RealInput	A	Surface area of surfaces
Modelica.Blocks.Interfaces.RealInput	azi	Azimuth of surface
Modelica.Fluid.Interfaces.FluidPort_a	port_a
Modelica.Fluid.Interfaces.FluidPort_b	port_b
Modelica.Fluid.Interfaces.FluidPorts_a	ports	Ports connector for multiple ports
Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a	ports_air	Heat convection ports for air volumes
Modelica.Blocks.Interfaces.RealInput	mWat_flow	Moisture mass flow rate being added to the zone air
Modelica.Blocks.Interfaces.RealInput[max(Medium.nC, 1)]	C_flow	Trace substance mass flow rate being added to the zone air
Modelica.Blocks.Interfaces.RealOutput	phi	Relative humidity in the zone
Modelica.Blocks.Interfaces.RealOutput	ppm	CO2 concentration in the zone

January 24, 2025, by Klaas De Jonge:
Added minimum zone air volume to avoid division by zero warning. See #1402.
July 27, 2018 by Filip Jorissen:
Added output for the CO2 concentration. See #868.
July 11, 2018, Filip Jorissen:
Added m_flow_nominal for setting nominal values of h_outflow and m_flow in FluidPorts. See #859.
May 29, 2018, Filip Jorissen:
Removed conditional fluid ports for JModelica compatibility. See #834.
April 27, 2018 by Filip Jorissen:
Modified model for supporting new interzonal air flow models. Air leakage model and its parameters have been removed. See #796.
November 15, 2016 by Filip Jorissen:
Revised documentation.
August 26, 2016 by Filip Jorissen:
Added support for conservation of energy.
April 30, 2016, by Filip Jorissen:
First implementation.