modelStructure
Ppd 12 example model
Extends from Modelica.Icons.Example.
Information
Example model of a partially renovated terraced house in Belgium. This model only contains the building structure.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | n50 | 1.1 | n50 value cfr airtightness, i.e. the ACH at a pressure diffence of 50 Pa |
| Modelica.Units.SI.Length | hFloor0 | 2.9 | Height of ground floor |
| Modelica.Units.SI.Length | hFloor1 | 2.7 | Height of first floor |
| Modelica.Units.SI.Length | hFloor2 | 2.5 | Height of second floor |
| Modelica.Units.SI.Length | lHallway | 8 | Length of hallway |
| Modelica.Units.SI.Length | wHallwayAvg | (wHallway1 + wHallway2)/2 | Hallway width |
| Modelica.Units.SI.Length | wHallway1 | 1.1 | Hallway width |
| Modelica.Units.SI.Length | wHallway2 | 1.4 | Hallway width |
| Modelica.Units.SI.Length | wZon | (wZonStr + wBathroom)/2 | Avg living width |
| Modelica.Units.SI.Length | wZonStr | 3.2 | Living width at street |
| Modelica.Units.SI.Length | wBuilding | 4.6 | |
| Modelica.Units.SI.Length | wBathroom | 2.85 | |
| Modelica.Units.SI.Length | lDiner | 3 | |
| Modelica.Units.SI.Length | wBedroom | 4.4 | |
| Modelica.Units.SI.Length | wDiner | 4.5 | |
| Modelica.Units.SI.Length | lPorch | 2 | |
| Modelica.Units.SI.Length | wPorch | wBuilding - wKitchen | |
| Modelica.Units.SI.Length | wKitchen | 1.4 | |
| Modelica.Units.SI.Length | lHalfBuilding | 3.75 | |
| Modelica.Units.SI.Length | lBuilding | 8 | |
| Modelica.Units.NonSI.Angle_deg | angDelta | 23.6 | |
| Modelica.Units.SI.Angle | north | IDEAS.Types.Azimuth.N + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | south | IDEAS.Types.Azimuth.S + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | west | IDEAS.Types.Azimuth.W + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | east | IDEAS.Types.Azimuth.E + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| IDEAS.BoundaryConditions.SimInfoManager | sim | ||
| IDEAS.Buildings.Components.BoundaryWall | com1 | Common wall on south side | |
| IDEAS.Buildings.Components.OuterWall | out1 | Outerwall on east side - kitchen | |
| IDEAS.Buildings.Components.InternalWall | cei2 | Floor between living and bedroom 1 | |
| IDEAS.Buildings.Components.InternalWall | cei1 | Floor between hallway and bedroom 1 | |
| IDEAS.Buildings.Components.Window | winBed3 | Window roof, bedroom 3 | |
| IDEAS.Buildings.Components.OuterWall | Roof2 | Roof, east side | |
| IDEAS.Buildings.Components.OuterWall | out2 | Outer wall of top floor on east facade | |
| IDEAS.Buildings.Components.RectangularZoneTemplate | living | ||
| IDEAS.Buildings.Components.RectangularZoneTemplate | hallway | ||
| IDEAS.Buildings.Components.RectangularZoneTemplate | Diner | ||
| IDEAS.Buildings.Components.RectangularZoneTemplate | Porch | ||
| IDEAS.Buildings.Components.RectangularZoneTemplate | bedRoom1 | Master bedroom | |
| IDEAS.Buildings.Components.RectangularZoneTemplate | bathRoom | Bathroom | |
| IDEAS.Buildings.Components.RectangularZoneTemplate | stairWay | Stairway | |
| IDEAS.Buildings.Components.RectangularZoneTemplate | bedRoom2 | Master bedroom | |
| IDEAS.Buildings.Components.RectangularZoneTemplate | bedRoom3 | Master bedroom | |
| IDEAS.Buildings.Components.OuterWall | Roof1 | Roof, west side | |
| IDEAS.Buildings.Components.InternalWall | cei3 | Dummy for representing stairway connection between floors |
Contents
| Name | Description |
|---|---|
| MediumAir | |
| MediumWater |
Revisions
- April 21, 2026, by Lone Meertens:
Fixed invalid escape sequences in Documentation annotation by correcting commit link formatting (changed\e25590c\toe25590c) to avoid OpenModelica syntax errors. This is for #1484. -
August 18, 2025, by Klaas De Jonge:
Disabled CheckVH for the two floors in the stairway (cei3 and StairWay.intFlo) that have thinner construction types then the general floor thicknesses. -
March 25, 2024, by Jelger Jansen:
Use hFloor2 for second floor rooms and use outer wall construction type for bedroom 2 (face C). This is for #1177. -
August 26, 2022, by Klaas De Jonge:
Assigned correct vertical heights for sloped surfaces in the roof. commit e25590c. -
August 2, 2022, by Filip Jorissen:
Added cavity in internal floors to represent staircases. See #1293. -
October 13, 2019, by Filip Jorissen:
Fixed floor type in hallway. See #1017. -
May 21, 2018, by Filip Jorissen:
Using model for air flow through vertical cavity. See #822. -
December 20, 2016 by Filip Jorissen:
First implementation.