modelMD_All_In_One_ThreePhaseMotor
All-in-one three-phase induction motor model framework for all three-phase multidomain motor models
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power flow data | |||
| OpenIPSL.Types.ApparentPower | M_b | 15e6 | Machine base power |
| Types.ApparentPower | S_b (from pfComponent) | SysData.S_b | System base power |
| Types.Voltage | V_b (from pfComponent) | 400e3 | Base voltage of the bus |
| Types.Frequency | fn (from pfComponent) | SysData.fn | System frequency |
| Types.ActivePower | P_0 (from pfComponent) | 1e6 | Initial active power |
| Types.ReactivePower | Q_0 (from pfComponent) | 0 | Initial reactive power |
| Types.PerUnit | v_0 (from pfComponent) | 1 | Initial voltage magnitude |
| Types.Angle | angle_0 (from pfComponent) | 0 | Initial voltage angle |
| Boolean | displayPF (from pfComponent) | false | Display power flow: |
| Parameter mask | |||
| Boolean | enableS_b (from pfComponent) | false | Enable S_b in parameter list |
| Boolean | enableV_b (from pfComponent) | false | Enable V_b in parameter list |
| Boolean | enablefn (from pfComponent) | false | Enable fn in parameter list |
| Boolean | enableP_0 (from pfComponent) | false | Enable P_0 in parameter list |
| Boolean | enableQ_0 (from pfComponent) | false | Enable Q_0 in parameter list |
| Boolean | enablev_0 (from pfComponent) | false | Enable v_0 in parameter list |
| Boolean | enableangle_0 (from pfComponent) | false | Enable angle_0 in parameter list |
| Boolean | enabledisplayPF (from pfComponent) | false | Enable displayPF in parameter list |
| Motor Setup | |||
| Boolean | Sup | true | True: Start-up process, False: Steady-state condition |
| Boolean | Ctrl | true | True: Model for VSD control, False: Model not controllable |
| Machine Parameters | |||
| Real | N | 1 | Number of pair of Poles |
| Modelica.Units.SI.Time | H | 0.4 | Inertia constant |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| OpenIPSL.Interfaces.PwPin | pwpin | ||
| Modelica.Mechanics.Rotational.Interfaces.Flange_b | flange1 | ||
| Modelica.Blocks.Interfaces.RealOutput | wr | Absolute angular velocity of flange as output signal | |
| Modelica.Blocks.Interfaces.RealInput | we | ||
| Modelica.Blocks.Interfaces.RealInput | mech_torque |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| OpenIPSL.Electrical.SystemBase | SysData (from pfComponent) | Must add this line in all models | |
| ThreePhase.BaseClasses.BaseMultiDomainThreePhase | motor |