modelNMD_DPIM
This model is the steady-state circuit model of the multi-domain single phase induction motor model initialized by either a split-phase auxiliary circuit or a capacitor-start auxiliary circuit.
Extends from OpenIMDML.NonMultiDomain.Motors.SinglePhase.BaseClasses.BaseNonMultiDomainSinglePhase (Base class model for the single-phase and dual-phase non multi-domain induction motor models.).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | init | Initialization Method: (1) Split-Phase Motor, (2) Capacitor-Start Motor | |
| Real | switch_open_speed | 0.2 | Auxiliary winding cut-off speed |
| Real | poles | 2 | Number of poles |
| Modelica.Units.SI.Inductance | Lmainr | Mutual-inductance of the main winding | |
| Modelica.Units.SI.Inductance | Lmain | Self-inductance of the magnetizing branch | |
| Modelica.Units.SI.Inductance | Lauxr | Mutual-inductance of the auxiliary winding | |
| Modelica.Units.SI.Inductance | Laux | Self-inductance of the auxiliary winding | |
| Modelica.Units.SI.Inductance | Lr | Self-inductance of the equivalent rotor windings | |
| Modelica.Units.SI.Resistance | Rmain | Resistance of the main winding | |
| Modelica.Units.SI.Resistance | Rr | Resistance of the rotor winding | |
| Modelica.Units.SI.Resistance | Raux | Resistance of the auxiliary winding | |
| Modelica.Units.SI.Capacitance | Cc | Capacitance of the capacitor-start configuration | |
| OpenIPSL.Types.PerUnit | H | Inertia Constant | |
| Real | a | Load Torque Coefficient a | |
| Real | b | Load Torque Coefficient b | |
| Real | c | Load Torque Coefficient c | |
| Power flow data | |||
| OpenIPSL.Types.ApparentPower | M_b (from BaseNonMultiDomainSinglePhase) | SysData.S_b | Machine base power |
| Types.ApparentPower | S_b (from pfComponent) | SysData.S_b | System base power |
| Types.Voltage | V_b (from pfComponent) | 400e3 | Base voltage of the bus |
| Types.Frequency | fn (from pfComponent) | SysData.fn | System frequency |
| Types.ActivePower | P_0 (from pfComponent) | 1e6 | Initial active power |
| Types.ReactivePower | Q_0 (from pfComponent) | 0 | Initial reactive power |
| Types.PerUnit | v_0 (from pfComponent) | 1 | Initial voltage magnitude |
| Types.Angle | angle_0 (from pfComponent) | 0 | Initial voltage angle |
| Boolean | displayPF (from pfComponent) | false | Display power flow: |
| Parameter mask | |||
| Boolean | enableS_b (from pfComponent) | false | Enable S_b in parameter list |
| Boolean | enableV_b (from pfComponent) | false | Enable V_b in parameter list |
| Boolean | enablefn (from pfComponent) | false | Enable fn in parameter list |
| Boolean | enableP_0 (from pfComponent) | false | Enable P_0 in parameter list |
| Boolean | enableQ_0 (from pfComponent) | false | Enable Q_0 in parameter list |
| Boolean | enablev_0 (from pfComponent) | false | Enable v_0 in parameter list |
| Boolean | enableangle_0 (from pfComponent) | false | Enable angle_0 in parameter list |
| Boolean | enabledisplayPF (from pfComponent) | false | Enable displayPF in parameter list |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| OpenIPSL.Interfaces.PwPin | p (from BaseNonMultiDomainSinglePhase) |