modelImpedYDHeat
One terminal impedance base with heat port, 3-phase dq0
Extends from ImpedYDBase (One terminal impedance base, 3-phase dq0), PowerSystems.Interfaces.AddHeat (Additional heat port).
Information
Same as ImpedYDBase, but contains an additional heat port.
Does not contain mass and specific heat. These parameters are expected to belong to the corresponding thermal model. The heat-flow at the connector is given by the total dissipated electric energy of all conductors (not included neutral-to-ground!).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SIpu.Resistance | r_n (from ImpedYDBase) | 1 | resistance neutral to grd |
| Parameter Scaling | |||
| Boolean | puUnits (from Nominal) | true | = true, if scaled with nom. values (pu), else scaled with 1 (SI) |
| Nominal | |||
| SI.Voltage | V_nom (from Nominal) | 1 | nominal Voltage (= base for pu) |
| SI.ApparentPower | S_nom (from Nominal) | 1 | nominal Power (= base for pu) |
| SI.Frequency | f_nom (from NominalAC) | system.f_nom | nominal frequency |
| Initialization | |||
| Types.Dynamics | dynType (from ImpedYDBase) | system.dynType | transient or steady-state model |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Ports.ACdq0_p | term (from Port_p) | positive terminal | |
| Thermal_p | heat (from AddHeat) | heat port |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Topology_p | top (from YDport_p) | ||
| PS.Voltage | v (from YDport_p) | voltage conductor | |
| PS.Current | i (from YDport_p) | current conductor | |
| PS.Voltage | v_n (from YDport_p) | voltage neutral | |
| PS.Current | i_n (from YDport_p) | top.i_n | current neutral to ground |
| SI.Temperature | T (from AddHeat) | Temperature of conductor | |
| SI.HeatFlowRate | Q_flow (from AddHeat) | Dissipated heat of conductor |