blockBlockM
Block modulation, 3phase
Extends from Partials.BlockBase (Block modulator base).
Information
Block (rectangular) modulation for DC_AC 3-phase inverters.
ampl(v_AC_abc) = v_DC/2 AC phase-voltage amplitude gates[1:2] phase-module a gates[3:4] phase-module b gates[5:6] phase-module c
The default-value
width = 2/3corresponds to '2 phases on, one phase off'.
The input vPhasor[1] has no influence on this model. It is only needed, if additional PWM is desired.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | m (from BlockBase) | 3 | 3 for 3-phase, 2 for 1-phase |
| SI.Angle | width (from BlockBase) | 2/3 | relative width (0 - 1) |
| SI.Angle | dphimin (from BlockBase) | 1e-3 | minimal phase angle on |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | theta (from BlockBase) | reference angle | |
| Modelica.Blocks.Interfaces.RealInput | vPhasor (from BlockBase) | voltage demand pu {norm(v), phase(v)} (see info) | |
| Modelica.Blocks.Interfaces.BooleanOutput | gates (from BlockBase) | gates |