modelStaticWaterWaterExchangerDTorWorEff
Static water/water heat exchanger with fixed delta temperature, delta power or efficiency
Information
## Copyright © EDF 2002 - 2026
## ThermoSysPro Version 4.2
Parameters
| Type | Name | Default | Description |
|---|
| Integer | exchanger_type | 1 | Exchanger type - 1: Delta temperature is fixed - 2: delta power is fixed - 3: efficiency is fixed |
| ThermoSysPro.Units.SI.TemperatureDifference | DTfroid | 0 | Temperature difference between the cold inlet and the cold outlet (active if exchanger_type=1) |
| Units.SI.Power | DW | 0 | Power increase on the cold side (active if exchanger_type=2) |
| Real | EffEch | 0.9 | Thermal exchange efficiency (=W/Wmax) (active if exchanger_type=3) |
| Real | Kc | 10 | Pressure loss coefficient for the hot fluid |
| Real | Kf | 10 | Pressure loss coefficient for the cold fluid |
| Units.SI.Position | z1c | 0 | Hot inlet altitude |
| Units.SI.Position | z2c | 0 | Hot outlet altitude |
| Units.SI.Position | z1f | 0 | Cold inlet altitude |
| Units.SI.Position | z2f | 0 | Cold outlet altitude |
| Boolean | continuous_flow_reversal | false | true: continuous flow reversal - false: discontinuous flow reversal |
| Units.SI.Density | p_rhoc | 0 | If > 0, fixed fluid density for the hot fluid |
| Units.SI.Density | p_rhof | 0 | If > 0, fixed fluid density for the cold fluid |
| Integer | modec | 0 | IF97 region of the water for the hot fluid. 1:liquid - 2:steam - 4:saturation line - 0:automatic |
| Integer | modecs | 0 | IF97 region of the water at the outlet of the hot fluid. 1:liquid - 2:steam - 4:saturation line - 0:automatic |
| Integer | modef | 0 | IF97 region of the water for the cold fluid. 1:liquid - 2:steam - 4:saturation line - 0:automatic |
Revisions
Author
Baligh El Hefni
