modelMultiSensor_Tpm

Sensor for temperature, pressure and mass flow rate

Extends from ThermofluidStream.Utilities.DropOfCommonsPlus.

Information

Sensor for measuring temperature, pressure and massflow at once.

This sensor must be included into the fluid stream, since it measures massflow.

Type	Name	Default	Description
Integer	digits	3	Number of significant digits to be displayed
ThermofluidStream.Sensors.Internal.Types.TemperatureUnit	temperatureUnit	"K"	Temperature unit (display and output)
ThermofluidStream.Sensors.Internal.Types.PressureUnit	pressureUnit	"Pa"	Pressure unit (display and output)
ThermofluidStream.Sensors.Internal.Types.MassFlowUnit	massFlowUnit	"(kg/s)"	Mass flow rate unit (display and output)
String	temperatureString	if temperatureUnit == "K" then "K" elseif temperatureUnit == "degC" then "°C" else "error"
String	massFlowString	if massFlowUnit == "(kg/s)" then "kg/s" elseif massFlowUnit == "(g/s)" then "g/s" else "error"
Output
Boolean	outputTemperature	false	= true, if temperature output is enabled
Boolean	outputPressure	false	= true, if pressure output is enabled
Boolean	outputMassFlowRate	false	= true, if mass flow rate output is enabled
Boolean	filter_output	false	= true, if sensor output is filtered (to break algebraic loops)
SI.Time	TC	0.1	Time constant of sensor output filter (PT1)
InitMode	init	InitMode.steadyState	Initialization mode for sensor output
Real	T_0	0	Start value for temperature output
Real	p_0	0	Start value for pressure output
Real	m_flow_0	0	Start value for mass flow rate output

Type	Name	Default	Description
Interfaces.Inlet	inlet
Interfaces.Outlet	outlet
Modelica.Blocks.Interfaces.RealOutput	T_out	T	Temperature output connector
Modelica.Blocks.Interfaces.RealOutput	p_out	p	Pressure output connector
Modelica.Blocks.Interfaces.RealOutput	m_flow_out	m_flow	Mass flow rate output connector
Real	p
Real	T
Real	m_flow

Name	Description
Medium	Medium model