modelPartialVolumeN
Extends from ThermofluidStream.Utilities.DropOfCommonsPlus.
Information
This is the partial parent class for all unidirectional volumes with more then one fore or rear. It is partial missing one equation its volume or the medium pressure and one for the volume work performed.
Conceptually a volume is a sink and a source. It therefore defines the level of inertial pressure r in a closed loop and acts as a loop breaker.
Volumes implement a damping term on the change of the stored mass to dampen out fast, otherwise undamped oscillations that appear when connecting volumes directly to other volumes or other boundaries (source, sink, boundary_fore, boundary_rear). With the damping term these oscillations will be still very fast, but dampened out, so a stiff solver might be able to handle them well. Damping is enabled by default and can be disabled by setting Advanced.k_volume_damping=0.
Per default the Volume has the two states energy and mass (U_med and M) and one state for each mass, as well as one state for each substance of the fluid (except the first one). These will be enforced to be states of the simulation, which can result in nonlinear systems of size one or two, but works very reliable. To get rid of these systems the modeler can enable the flag 'usePreferredMediumStates' in the 'Advanced' tab. Then the volume uses the states preferred by the medium object, rather then the default ones, which can improve the nonlinear systems most of the time, but also might lead to larger nonlinear systems (e.g. in the Test 'VolumesDirectCoupling').
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | N_rear | 1 | Number if rear ports |
| Integer | N_fore | 1 | Number if fore ports |
| Boolean | useHeatport | false | =true, if heatport is enabled |
| SI.Area | A | 1 | Heat transfer area |
| SI.CoefficientOfHeatTransfer | U | 200 | Thermal transmittance |
| Initialization › Pressure | |||
| Boolean | initialize_pressure | true | =true, if pressure is initialized |
| Medium.AbsolutePressure | p_start | Medium.p_default | Initial pressure set value |
| Initialization › Temperature | |||
| Boolean | initialize_energy | true | = true, if internal energy is initialized |
| Medium.Temperature | T_start | Medium.T_default | Initial Temperature set value |
| Initialization › Mass fractions | |||
| Boolean | initialize_Xi | true | =true, if mass fractions are iinitialized |
| Medium.MassFraction[Medium.nXi] | Xi_0 | Medium.X_default[1:Medium.nXi] | Initial mass fractions set values |
| Initialization › Specific enthalpy | |||
| Boolean | use_hstart | false | =true, if internal energy is initialized with specific enthalpy |
| Medium.SpecificEnthalpy | h_start | Medium.h_default | Initial specific enthalpy set value |
| Advanced | |||
| Utilities.Units.Inertance | L | dropOfCommons.L | Inertance of rear/fore ports |
| SI.MassFlowRate | m_flow_reg | dropOfCommons.m_flow_reg | Regularization threshold of mass flow rate |
| Boolean | usePreferredMediumStates | false | =true, if preferred medium states are used |
| Advanced › Damping | |||
| Real | k_volume_damping | dropOfCommons.k_volume_damping | Damping factor multiplicator |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | heatPort | ||
| Interfaces.Rear[N_rear] | rear | ||
| Interfaces.Fore[N_fore] | fore | ||
| Medium.BaseProperties | medium | ||
| SI.Volume | V | Volume | |
| SI.Mass | M | V*medium.d | Mass |
| SI.Mass[Medium.nXi] | MXi | M*medium.Xi | Masses of species |
| SI.Energy | U_med | M*medium.u | Inertal energy |
| SI.HeatFlowRate | Q_flow | Heat flow rate | |
| SI.Power | W_v | Work due to change in volume (Volumenänderungsarbeit) |
Contents
| Name | Description |
|---|---|
| Medium | Medium model |