modelGetInputsHydraulic
Get enabled inputs and parameters of disabled inputs
Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).
Information
1. Purpose of model
This model gets the value of the desired input. It is a modified version of ClaRa.Components.TurboMachines.Compressors.Fundamentals.GetInputsHydraulic in ClaRa 1.5.1: Electric power was added.
2. Level of detail, physical effects considered, and physical insight
(no remarks)
3. Limits of validity
(no remarks)
4. Interfaces
(no remarks)
5. Nomenclature
(no remarks)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Carsten Bode (c.bode@tuhh.de) in Nov 2020
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | m_flow_in | Prescribed mass flow rate | |
| Modelica.Blocks.Interfaces.RealInput | V_flow_in | Prescribed volume flow rate | |
| Modelica.Blocks.Interfaces.RealInput | dp_in | Prescribed pressure increase | |
| Modelica.Blocks.Interfaces.RealInput | P_shaft_in | Shaft power input | |
| Modelica.Blocks.Interfaces.RealInput | P_el_in | Electric power input |