modelPartialBoiler
Extends from TransiEnt.Basics.Icons.Model (Icon for models).
Information
1. Purpose of model
Partial model of a gas boiler using TransiEnt interfaces and TransiEnt.Statistics. Gas Consumption is computed using a constant efficiency and constant heat of combustion.
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4. Interfaces
inlet: fluidPortIn
outlet: fluidPortOut
Q_flow_set: heat flow rate in W (setpoint for thermal heat)
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Configuration | |||
| Boolean | useFluidPorts | true | True if fluid ports shall be used |
| Fundamental Definitions | |||
| TILMedia.VLEFluidTypes.BaseVLEFluid | medium | simCenter.fluid1 | Heat carrier medium to be used |
| Nominal Values | |||
| SI.HeatFlowRate | Q_flow_n | 360e6 | |
| Technical Specifications | |||
| SI.Efficiency | eta | 0.95 | |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Basics.Interfaces.Thermal.FluidPortIn | inlet | ||
| Basics.Interfaces.Thermal.FluidPortOut | outlet | ||
| TransiEnt.Basics.Interfaces.Thermal.HeatFlowRateIn | Q_flow_set | Setpoint for thermal heat |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.SimCenter | simCenter | ||
| TransiEnt.ModelStatistics | modelStatistics |