modelTestCollectorEN12975
Tester for a solar collector using the ambient tables and fluid sinks and sources
Extends from TransiEnt.Basics.Icons.Checkmodel (Icon for check models).
Information
1. Purpose of model
Test model for CollectorEN12975 model
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4. Interfaces
(no remarks)
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no validation or testing necessary)
9. References
Note that the inlet temperature should never fall below 0 °C. A possible controller for this case can be looked at under TransiEnt.Producer.Heat.SolarThermal.Controller.
10. Version History
Created by Lisa Andresen (andresen@tuhh.de), Apr 2014
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.SimCenter | simCenter | ||
| ClaRa.Components.BoundaryConditions.BoundaryVLE_pTxi | sink | ||
| ClaRa.Components.BoundaryConditions.BoundaryVLE_Txim_flow | source | ||
| ClaRa.Components.Sensors.SensorVLE_L1_T | T_in | ||
| ClaRa.Components.Sensors.SensorVLE_L1_T | T_out | ||
| TransiEnt.Producer.Heat.SolarThermal.SolarCollector_L1_constProp | solarCollector | ||
| ModelStatistics | modelStatistics | ||
| Modelica.Blocks.Sources.RealExpression | realExpression | ||
| ClaRa.Components.BoundaryConditions.BoundaryVLE_pTxi | sink1 | ||
| ClaRa.Components.BoundaryConditions.BoundaryVLE_Txim_flow | source1 | ||
| ClaRa.Components.Sensors.SensorVLE_L1_T | T_in1 | ||
| ClaRa.Components.Sensors.SensorVLE_L1_T | T_out1 | ||
| TransiEnt.Producer.Heat.SolarThermal.SolarCollector_L1_constProp | solarCollector1 | ||
| Modelica.Blocks.Sources.RealExpression | realExpression1 | ||
| Basics.Tables.Ambient.DNI_Hamburg_3600s_2012_TMY | dNI_Hamburg_3600s_2012_TMY | ||
| Basics.Tables.Ambient.DHI_Hamburg_3600s_2012_TMY | dHI_Hamburg_3600s_2012_TMY |