modelControlOutletWaterTemperature
Information
Hypothesis and equations
Generic model of water outlet temperature of a heating system based on a PID model and a water design table. The main output is the part load ratio that should be connected to the system (10% - 100%).
Bibliography
none
Instructions for use
none
Known limits / Use precautions
none
Validations
Validated model - Hubert Blervaque 01/2013
--------------------------------------------------------------
Licensed by EDF under a 3-clause BSD-license
Copyright © EDF 2009 - 2023
BuildSysPro version 3.6.0
Author : Hubert BLERVAQUE, Sila FILFLI, EDF (2013)
--------------------------------------------------------------
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | RegTOR | true | On/Off control ? |
| Real[:,2] | table | [-20, 60; -7, 52; 0, 43; 7, 37; 20, 20] | Table of water design curve : exterior temperature (°C) in 1st row and setpoint of system output temperature (°C) in 2nd row |
| Modelica.Units.SI.TemperatureDifference | THyst | 1 | Upper and lower tolerance compared with the setpoint |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | T2 | External temperature | |
| Modelica.Blocks.Interfaces.RealOutput | Y2 | Ratio modifier of PLR | |
| Modelica.Blocks.Interfaces.RealInput[2] | TM | Secondary circuit / 1- fluid temperature (K), 2-flow rate (kg/s) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| WaterDesignTemperature | LoiDEau | ||
| Modelica.Blocks.Math.Gain | PLR | ||
| Modelica.Blocks.Continuous.Integrator | TpsFonctionnementG | ||
| Modelica.Blocks.Math.BooleanToReal | GenBooleanToRealG | ||
| Modelica.Blocks.MathInteger.TriggeredAdd | CountG | ||
| Modelica.Blocks.Sources.IntegerExpression | integerExpressionG | ||
| Modelica.Blocks.Continuous.LimPID | PID_d |