modelMixedAir
Validation model for the correct initialization of the mixed air model
Extends from Modelica.Icons.Example.
Information
This model tests the correct initialization of Buildings.ThermalZones.Detailed.MixedAir. The air temperature starts at -15°C and remains there.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Temperature | T_start | 273.15 - 15 | Initial value |
| Buildings.HeatTransfer.Data.OpaqueConstructions.Insulation100Concrete200 | matLayExt | Construction material for exterior walls | |
| Buildings.HeatTransfer.Data.OpaqueConstructions.Brick120 | matLayPar | Construction material for partition walls | |
| Buildings.HeatTransfer.Data.OpaqueConstructions.Generic | matLayRoo | Construction material for roof | |
| Buildings.HeatTransfer.Data.OpaqueConstructions.Generic | matLayFlo | Construction material for floor | |
| Buildings.HeatTransfer.Data.GlazingSystems.DoubleClearAir13Clear | glaSys | Data record for the glazing system | |
| Integer | nConExtWin | 1 | Number of constructions with a window |
| Integer | nConBou | 1 | Number of surface that are connected to constructions that are modeled inside the room |
| Integer | nSurBou | 1 | Number of surface that are connected to the room air volume |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.ThermalZones.Detailed.MixedAir | roo | Room model | |
| Modelica.Blocks.Sources.Constant | qConGai_flow | Convective heat gain | |
| Modelica.Blocks.Sources.Constant | qRadGai_flow | Radiative heat gain | |
| Modelica.Blocks.Routing.Multiplex3 | multiplex3_1 | ||
| Modelica.Blocks.Sources.Constant | qLatGai_flow | Latent heat gain | |
| Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | weaDat | ||
| Modelica.Blocks.Sources.Constant | uSha | Control signal for the shading device | |
| Modelica.Blocks.Routing.Replicator | replicator | ||
| Buildings.HeatTransfer.Sources.FixedTemperature[nConBou] | TSoi | Boundary condition for construction | |
| Buildings.HeatTransfer.Sources.FixedTemperature[nSurBou] | TBou | Boundary condition for construction | |
| HeatTransfer.Conduction.MultiLayer[nSurBou] | conOut | Construction that is modeled outside of room | |
| Buildings.Fluid.Sources.Boundary_pT | boundary | Boundary condition | |
| Modelica.Blocks.Sources.Constant | HSol | Solar irradition | |
| Modelica.Blocks.Sources.Constant | T | Dry bulb and black body sky temperature |
Contents
| Name | Description |
|---|---|
| MediumA | Medium model |
Revisions
-
April 23, 2020, by Michael Wetter:
Updated documentation. -
October 29, 2016, by Michael Wetter:
Corrected error in the documentation. -
March 26, 2015, by Michael Wetter:
First implementation based on Buildings.ThermalZones.Detailed.Examples.MixedAirInitialization.